Spindles changed track width - The 1947 - Present Chevrolet & GMC Truck Message Board Network

z71se · 02-22-2021, 11:09 PM

I did Ridetech a-arms and coilovers up front on my ‘77 (the kit comes with CPP lowering spindles) and now my track width is at least 1.5” narrower and it looks weird. I bought the truck lowered with drop spindles already on it (no idea of brand). Are CPP spindles stock width while some other brands are wider ( like the ones my truck originally came with)?

SCOTI · 02-23-2021, 10:37 AM

The 'modular' spindles from CPP (the ones w/the bolt-on caliper bracket) don't increase track width like standard drop spindles will. It's only like a .250-.375" per side though (not .750" per side).

So.... If you had drop spindles already, they would have pushed track width out .250-.375" vs. a stock disc brake spindle (it's been common knowledge that drop spindles pushed the wheels out slightly). Switching to CPP's modular spindle negates that increase & is supposed to narrow the track width vs. a stock disc brake spindle.

So, the CPP spindle might be a total of .750" per side depending on the measurements of each spindle.

cadillac_al · 02-23-2021, 11:58 AM

They probably do that so you can run wider wheels/tires.

**1957 Chief** · 02-27-2021, 11:43 AM

Pretty sure the ride tech a-arms are narrower as well. I have them on my truck.

Bubba

02-22-2021, 11:09 PM	#1
z71se Registered User Join Date: Nov 2015 Location: Cailfornia Posts: 284	Spindles changed track width I did Ridetech a-arms and coilovers up front on my ‘77 (the kit comes with CPP lowering spindles) and now my track width is at least 1.5” narrower and it looks weird. I bought the truck lowered with drop spindles already on it (no idea of brand). Are CPP spindles stock width while some other brands are wider ( like the ones my truck originally came with)? Attached Images __________________ 77 C10 Silverado SWB - LS Swap, mechanical resto-mod 05 Z71 Silverado RCSB - 5.3L LM7, 76mm turbo, 4L80e

02-23-2021, 10:37 AM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,066	Re: Spindles changed track width The 'modular' spindles from CPP (the ones w/the bolt-on caliper bracket) don't increase track width like standard drop spindles will. It's only like a .250-.375" per side though (not .750" per side). So.... If you had drop spindles already, they would have pushed track width out .250-.375" vs. a stock disc brake spindle (it's been common knowledge that drop spindles pushed the wheels out slightly). Switching to CPP's modular spindle negates that increase & is supposed to narrow the track width vs. a stock disc brake spindle. So, the CPP spindle might be a *total* of .750" per side depending on the measurements of each spindle. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 02-23-2021 at 10:43 AM.

02-23-2021, 11:58 AM	#3
cadillac_al Registered User Join Date: Oct 2013 Location: Maine Posts: 2,376	Re: Spindles changed track width They probably do that so you can run wider wheels/tires. __________________ 76 Chevy K20 76 GMC K15 77 Chevy C10 77 Chevy K10

02-27-2021, 11:43 AM	#4
1957 Chief Senior Member Join Date: Jun 2016 Location: Beebe, AR Posts: 462	Re: Spindles changed track width Pretty sure the ride tech a-arms are narrower as well. I have them on my truck. Bubba

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.