Hi Back Buckets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**dagnabbitt** · 04-01-2021, 12:11 PM

I have the below buckets that I received in a trade a while ago, I was after the mounting brackets that came with them, which I removed and kept.

I think that they are mid 70s Blazer seats, perhaps someone can confirm that first off. Could be from a van, I guess, but they sure look like truck seats.

I did not believe at first that they have the original upholstery, but that appears to be the case. In fact its hard to tell which would have been the drivers side just by looking at them, they are that good.

So, wondering WIW, with no mounting brackets, just some pretty nice seats.

**dagnabbitt** · 04-01-2021, 12:24 PM

I did some of my own research and stumbled across this brochure, so I am a little relieved that they are Blazer seats indeed, 1980, in Silverado Trim, Custom Cloth.

Still interested in hearing what people think they are worth.

**too much stuff** · 04-01-2021, 12:30 PM

I can't get $350 for these with the blazer brackets. Shipping is a killer.
http://67-72chevytrucks.com/vboard/s...d.php?t=812801

**dagnabbitt** · 04-01-2021, 12:41 PM

Quote:

Originally Posted by too much stuff

I can't get $350 for these with the blazer brackets. Shipping is a killer.
http://67-72chevytrucks.com/vboard/s...d.php?t=812801

I guess shipping would be even moreso a problem where I am located, ha.

**dagnabbitt** · 05-14-2021, 12:09 PM

Have these for sale locally, and no interest whatsoever at $200 Canadian ($150 USD).

I understand that not everyone is restoring a Blazer, but they make nice captains chairs for regular pickups if the bracketry can be fabbed.

Looking at other threads on the subject I am thinking I might remove the upholstery and cut them down to low backs, been wanting to try that.

04-01-2021, 12:11 PM	#1
dagnabbitt Senior Member Join Date: Dec 2014 Location: Edmonton Alberta Posts: 1,457	Hi Back Buckets I have the below buckets that I received in a trade a while ago, I was after the mounting brackets that came with them, which I removed and kept. I think that they are mid 70s Blazer seats, perhaps someone can confirm that first off. Could be from a van, I guess, but they sure look like truck seats. I did not believe at first that they have the original upholstery, but that appears to be the case. In fact its hard to tell which would have been the drivers side just by looking at them, they are that good. So, wondering WIW, with no mounting brackets, just some pretty nice seats. Attached Images __________________ DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10

04-01-2021, 12:24 PM	#2
dagnabbitt Senior Member Join Date: Dec 2014 Location: Edmonton Alberta Posts: 1,457	Re: Hi Back Buckets I did some of my own research and stumbled across this brochure, so I am a little relieved that they are Blazer seats indeed, 1980, in Silverado Trim, Custom Cloth. Still interested in hearing what people think they are worth. Attached Images __________________ DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 Last edited by dagnabbitt; 04-01-2021 at 12:38 PM.

04-01-2021, 12:30 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Hi Back Buckets I can't get $350 for these with the blazer brackets. Shipping is a killer. http://67-72chevytrucks.com/vboard/s...d.php?t=812801 __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-14-2021, 12:09 PM	#5
dagnabbitt Senior Member Join Date: Dec 2014 Location: Edmonton Alberta Posts: 1,457	Re: Hi Back Buckets Have these for sale locally, and no interest whatsoever at $200 Canadian ($150 USD). I understand that not everyone is restoring a Blazer, but they make nice captains chairs for regular pickups if the bracketry can be fabbed. Looking at other threads on the subject I am thinking I might remove the upholstery and cut them down to low backs, been wanting to try that. __________________ DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.