Need some Rocker dimensions / pics if anyone has them

[CousinTone]

I bought a true project 1964 C20 the PO installed the left inner floor and (inner) rocker. I’m not sure it’s positioned correctly and would appreciate a picture and measurement of what the distance is between the ridge of the outer rocker relative to the inner rocker & floor. I’m not 100% sure they have it installed correctly and would appreciate a second or third opinion. Let me know if you need more details. Thanks in advance for all your guidance.

My concern is when I install the weatherstripping that there’s the proper alignment for the door when it’s closed. Any advice is appreciated. TV

[SkinnyG]

I'm not exactly sure what it is you want measured to and from.

My inner rocker position was pretty much dictated by the bottom of the door pillars. Neither my left and right placements/positions are consistent side-to-side, and all my parts were from the same supplier.

What truly matters, is the fitment of the outer rocker to the doors.

[CousinTone]

Originally Posted by SkinnyG

I'm not exactly sure what it is you want measured to and from.

My inner rocker position was pretty much dictated by the bottom of the door pillars. Neither my left and right placements/positions are consistent side-to-side, and all my parts were from the same supplier.

What truly matters, is the fitment of the outer rocker to the doors.

Being new to fab, I’ll post a pic of how the outer lines up with pilars and we’ll see if it’s close. So long as it aligns with the weather strip line, it should be ok from what I take from your advice. Thank you!!