Tonneau covers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mookandairin · 09-14-2021, 09:45 AM

I recently built my drag chassis in my 65 step side and want to put a hard cover on the bed to cover the ladder bars and rearend etc. I broke the bank on it and am going to have to drill holes in it for the bars on the cage going to the rear so I am looking for one on the used market to save cash. My bed measures 80 1/2” X 58 1/4 outside edge to outside edge. Is there another truck out there that would take the Same hard cover as mine for me to use in the search engine on say marketplace or CL? Ive been looking for a few days and see a lot of 6.5 beds but than again a lot of ppl just put in the truck they have in the add hence “is there another truck” question
Thanks Danny aka Soda
Posted via Mobile Device

**The Rocknrod** · 09-14-2021, 10:12 AM

1956 to 66 stepside is the same bed size and maybe up to 72? Maybe even latter.
If you go to the GM Heritage website you can download info on various years as well, dimensions ect are in the info packs. https://www.gmheritagecenter.com/gm-...tion-kits.html

**special-K** · 09-18-2021, 09:04 AM

'55 to '87 Stepside/Wideside has the same dimensions w/flat top rails

09-14-2021, 09:45 AM	#1
mookandairin Registered User Join Date: May 2014 Location: Germantown Posts: 58	Tonneau covers I recently built my drag chassis in my 65 step side and want to put a hard cover on the bed to cover the ladder bars and rearend etc. I broke the bank on it and am going to have to drill holes in it for the bars on the cage going to the rear so I am looking for one on the used market to save cash. My bed measures 80 1/2” X 58 1/4 outside edge to outside edge. Is there another truck out there that would take the Same hard cover as mine for me to use in the search engine on say marketplace or CL? Ive been looking for a few days and see a lot of 6.5 beds but than again a lot of ppl just put in the truck they have in the add hence “is there another truck” question Thanks Danny aka Soda Posted via Mobile Device

09-14-2021, 10:12 AM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Tonneau covers 1956 to 66 stepside is the same bed size and maybe up to 72? Maybe even latter. If you go to the GM Heritage website you can download info on various years as well, dimensions ect are in the info packs. https://www.gmheritagecenter.com/gm-...tion-kits.html __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

09-18-2021, 09:04 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Tonneau covers '55 to '87 Stepside/Wideside has the same dimensions w/flat top rails __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.