|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
09-16-2021, 12:17 PM
|
#1 |
|
Registered User
Join Date: Jan 2014
Location: milwaukee, wi
Posts: 58
|
C10/C20 Body Differences
I have a '62 C20 that I have pretty much had to replace Fenders, grill support, and radiator support with aftermarket items due to rust or other damage. Trying to do a dry fit right now and the holes just aren't lining up. Some more than an inch off......AM I missing something here? There's nothing I have found when going back and looking at what I ordered compared to the options available that had a different part number for a C10 over a C20.
|
|
|
|
09-16-2021, 03:05 PM
|
#2 |
|
Senior Member
   
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,488
|
Re: C10/C20 Body Differences
It could be the aftermarket components themselves.
How's your cab mounts and core support mounts? If those are missing or blown out, you'll have a hard time getting everything lined up too
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
|
|
|
|
09-16-2021, 03:08 PM
|
#3 | |
|
Registered User
Join Date: Jan 2014
Location: milwaukee, wi
Posts: 58
|
Re: C10/C20 Body Differences
Thankfully Cab and Core Support Mounts are in perfect condition. Thinking I just have to make it work. Not a big deal, just way more work than I hoped.
Quote:
|
|
|
|
|
|
09-16-2021, 03:10 PM
|
#4 |
|
Senior Member
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,488
|
Re: C10/C20 Body Differences
Yup, that's the unfortunate part of the full aftermarket parts.
A tip is don't tighten any bolts completely until you have every bolt in its home on all the panels. Then you can go back and tighten them all up
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
