Thinking of going with steel braided fuel lines..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ellisjay2 · 09-21-2021, 01:00 AM

Found this on Amazon. Figured I'd use it in replacement of rubber line from pump to filter to end of dual feed....I plant to go back plastic filter since I learned glass can break....Good idea ???? Suggestions??? What else might I need???

**Warrens69GMC** · 09-21-2021, 01:10 AM

That's a carb line with a steel cosmetic sleeve. Notice the worm drive clamps.

It just looks pretty, same function and rating as regular fuel line. (carbed)

ellisjay2 · 09-21-2021, 03:09 PM

Ok....thanx for info. I'm just wanting to secure fuel line away from heat and breakage. I plan on ditching glass filter and going with filter between tank and pump away from engine compartment. Straight line to carb.

**Warrens69GMC** · 09-21-2021, 04:50 PM

Use a 1990-1994 Dodge Caravan Fuel filter

https://www.stockwiseauto.com/power-...xf1568927f8002

Nick_R_23 · 09-21-2021, 05:44 PM

If you’re looking for a bit more protection for the fuel line itself, I would use EFI rated hose and EFI hose clamps. You can also purchase Fire Sleeve to slip over the line, I think 3 feet runs about $30 on Summit. I use this whenever I have to run rubber fuel hose near any engine component.

09-21-2021, 01:00 AM	#1
ellisjay2 Registered User Join Date: Feb 2014 Location: marietta ga Posts: 147	Thinking of going with steel braided fuel lines..... Found this on Amazon. Figured I'd use it in replacement of rubber line from pump to filter to end of dual feed....I plant to go back plastic filter since I learned glass can break....Good idea ???? Suggestions??? What else might I need??? Attached Images __________________ : Eli540 86 gmc 2500 longbed Carb 5.7, rwd, 400 tranny.

09-21-2021, 01:10 AM	#2
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,625	Re: Thinking of going with steel braided fuel lines..... That's a carb line with a steel cosmetic sleeve. Notice the worm drive clamps. It just looks pretty, same function and rating as regular fuel line. (carbed) __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT

09-21-2021, 03:09 PM	#3
ellisjay2 Registered User Join Date: Feb 2014 Location: marietta ga Posts: 147	Re: Thinking of going with steel braided fuel lines..... Ok....thanx for info. I'm just wanting to secure fuel line away from heat and breakage. I plan on ditching glass filter and going with filter between tank and pump away from engine compartment. Straight line to carb. __________________ : Eli540 86 gmc 2500 longbed Carb 5.7, rwd, 400 tranny.

09-21-2021, 04:50 PM	#4
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,625	Re: Thinking of going with steel braided fuel lines..... Use a 1990-1994 Dodge Caravan Fuel filter https://www.stockwiseauto.com/power-...xf1568927f8002 __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT

09-21-2021, 05:44 PM	#5
Nick_R_23 Registered User Join Date: May 2016 Location: Willow, Alaska Posts: 881	Re: Thinking of going with steel braided fuel lines..... If you’re looking for a bit more protection for the fuel line itself, I would use EFI rated hose and EFI hose clamps. You can also purchase Fire Sleeve to slip over the line, I think 3 feet runs about $30 on Summit. I use this whenever I have to run rubber fuel hose near any engine component.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.