Conversion tank - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Asshat · 11-06-2021, 01:59 PM

Want to confirm the connections on the tank, the smallest is for the canister, correct?

Also, looking for options for a filler port.

And, I’ll need to remove some of the bed rails too?

Asshat · 11-06-2021, 03:45 PM

Looks like I need to cut this rail that bolts to the bed boards.
It’s the only way to make it fit.

Asshat · 11-06-2021, 08:11 PM

Wondering how these straps are supposed to mount. Are these intended to be bent into the correct shape for tha application?
Someone must have already installed this style tank. I didn’t find any pics. Mostly seeing pics of the camaro tank install.

AcampoDave · 11-06-2021, 10:04 PM

I bent my straps to fit and in the area where the bolt goes thru them to the crossmember, I doubled the end back over itself and creased it down real flat in the vise so as to have some extra meat for the bolt to pass thru. They were perfectly flat though in my kit, where yours appear ro have been pre formed

**The Rocknrod** · 11-07-2021, 06:33 AM

A good video on the install - https://youtu.be/orfmf9YlFak

Asshat · 11-07-2021, 07:55 AM

Quote:

Originally Posted by The Rocknrod

A good video on the install - https://youtu.be/orfmf9YlFak

That helps a lot - Thank you!

11-06-2021, 01:59 PM	#1
Asshat Registered User Join Date: Jul 2015 Location: South Orange County CA Posts: 1,265	Conversion tank Want to confirm the connections on the tank, the smallest is for the canister, correct? Also, looking for options for a filler port. And, I’ll need to remove some of the bed rails too? Attached Images __________________ 1963 C20, small window, long bed 292, 4-speed Last edited by Asshat; 11-06-2021 at 07:59 PM.

11-06-2021, 03:45 PM	#2
Asshat Registered User Join Date: Jul 2015 Location: South Orange County CA Posts: 1,265	Re: Conversion tank Looks like I need to cut this rail that bolts to the bed boards. It’s the only way to make it fit. Attached Images __________________ 1963 C20, small window, long bed 292, 4-speed

11-06-2021, 08:11 PM	#3
Asshat Registered User Join Date: Jul 2015 Location: South Orange County CA Posts: 1,265	Re: Conversion tank Wondering how these straps are supposed to mount. Are these intended to be bent into the correct shape for tha application? Someone must have already installed this style tank. I didn’t find any pics. Mostly seeing pics of the camaro tank install. Attached Images __________________ 1963 C20, small window, long bed 292, 4-speed

11-06-2021, 10:04 PM	#4
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,778	Re: Conversion tank I bent my straps to fit and in the area where the bolt goes thru them to the crossmember, I doubled the end back over itself and creased it down real flat in the vise so as to have some extra meat for the bolt to pass thru. They were perfectly flat though in my kit, where yours appear ro have been pre formed

11-07-2021, 06:33 AM	#5
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Conversion tank A good video on the install - https://youtu.be/orfmf9YlFak __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.