17.5 eight lug wheels for a ‘64 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**gmcmhn** · 12-05-2021, 10:34 AM

Would like to find out if the 17.5’s from the 1950’s will fit trucks from the 1960’s.
And if they don’t, I woul like a source to look up the parts numbers for both decades.

Thanks, my first post.

**60-66** · 12-05-2021, 10:55 AM

For some reason I cant reply to your PM . You can text me at 262 308 0673

**cwcarpenter98** · 12-05-2021, 03:42 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

Also, please remember that PM sales are prohibited.
http://67-72chevytrucks.com/vboard/a...t.php?f=93&a=8

Thanks

12-05-2021, 10:34 AM	#1
gmcmhn New Member Join Date: Nov 2019 Location: Jefferson, North Carolina Posts: 4	17.5 eight lug wheels for a ‘64 Would like to find out if the 17.5’s from the 1950’s will fit trucks from the 1960’s. And if they don’t, I woul like a source to look up the parts numbers for both decades. Thanks, my first post. Last edited by cwcarpenter98; 12-05-2021 at 03:38 PM. Reason: Removed WTB

12-05-2021, 10:55 AM	#2
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: Looking for 17.5 eight lug wheels for a ‘64 For some reason I cant reply to your PM . You can text me at 262 308 0673 __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK Last edited by cwcarpenter98; 12-05-2021 at 03:40 PM.

12-05-2021, 03:42 PM	#3
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,491	Re: 17.5 eight lug wheels for a ‘64 Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Also, please remember that PM sales are prohibited. http://67-72chevytrucks.com/vboard/a...t.php?f=93&a=8 Thanks __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.