1960 C10 Apache Hood Emblem, Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jhvaughn · 02-15-2022, 11:57 AM

I'm looking to replace my hood emblem (think part #3767009) as well as get new LED turn signals and some misc screws retainers, etc. But, I can't seem to find any site that offers new, replacement parts for the "snout" hood like the one I have.

LMC and others only seem to carry parts for the more common 64-66 hood.

Does anyone know of a site that offers parts for my hood?

Thanks,
Heath

**cwcarpenter98** · 02-15-2022, 02:38 PM

There are some parts available, but not all for those hoods since they were 2 year only hoods.
You can get repro side emblems for all 60-66 Chevys, but I don't believe anyone is making a reproduction of the 60-61 hood bowtie.

On the turn signals, the 60-61 Chevy lenses and buckets are the same size and shape as the 62-66s, so you can get LEDs, but they might be amber lenses only. I'm not completely up to date on the LED stuff as I haven't used them on my truck.

I would recommend browsing the Truck and Car shop catalogue to see what's available in the aftermarket if you haven't done so already.

jhvaughn · 02-15-2022, 03:45 PM

Thanks! I found the side emblems but am still searching for the hood emblem. Will check out Car and Truck shop catalog.

Too Slow '90 · 02-18-2022, 07:51 PM

I am looking for the same emblem but I don't think they are being reproduced.

SkinnyG · 02-18-2022, 08:53 PM

James Van Vranken on Facebook 60-66 Chevy/GMC Trucks made the V8 emblem for these hoods. Perhaps he can help?

I'm not affiliated, I just remember seeing them.

https://www.facebook.com/commerce/li...3745116686871/

There is also one on eBay right now.

https://www.ebay.ca/itm/154384985561

jhvaughn · 02-18-2022, 09:48 PM

Thanks. I'll check it out. I still have the original one on the truck, just looking for a new replacement. May try to find someone to restore the one I have, if possible.

02-15-2022, 11:57 AM	#1
jhvaughn Registered User Join Date: Mar 2016 Location: Helena, AL Posts: 53	1960 C10 Apache Hood Emblem, Parts I'm looking to replace my hood emblem (think part #3767009) as well as get new LED turn signals and some misc screws retainers, etc. But, I can't seem to find any site that offers new, replacement parts for the "snout" hood like the one I have. LMC and others only seem to carry parts for the more common 64-66 hood. Does anyone know of a site that offers parts for my hood? Thanks, Heath

02-15-2022, 02:38 PM	#2
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,491	Re: 1960 C10 Apache Hood Emblem, Parts There are some parts available, but not all for those hoods since they were 2 year only hoods. You can get repro side emblems for all 60-66 Chevys, but I don't believe anyone is making a reproduction of the 60-61 hood bowtie. On the turn signals, the 60-61 Chevy lenses and buckets are the same size and shape as the 62-66s, so you can get LEDs, but they might be amber lenses only. I'm not completely up to date on the LED stuff as I haven't used them on my truck. I would recommend browsing the Truck and Car shop catalogue to see what's available in the aftermarket if you haven't done so already. __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

02-18-2022, 07:51 PM	#4
Too Slow '90 Registered User Join Date: Nov 2014 Location: The Old Dominion Posts: 63	Re: 1960 C10 Apache Hood Emblem, Parts I am looking for the same emblem but I don't think they are being reproduced.

02-18-2022, 08:53 PM	#5
SkinnyG Registered User Join Date: Feb 2012 Location: Beautiful BC, Canada, eh?! Posts: 2,267	Re: 1960 C10 Apache Hood Emblem, Parts James Van Vranken on Facebook 60-66 Chevy/GMC Trucks made the V8 emblem for these hoods. Perhaps he can help? I'm not affiliated, I just remember seeing them. https://www.facebook.com/commerce/li...3745116686871/ There is also one on eBay right now. https://www.ebay.ca/itm/154384985561 __________________ 1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, turbo, LS 1977 Silverado: Shortboxed & dropped, potato-potato V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag Lotus Super 7 Replica: Scratch-built street-legal rollerskate

02-18-2022, 09:48 PM	#6
jhvaughn Registered User Join Date: Mar 2016 Location: Helena, AL Posts: 53	Re: 1960 C10 Apache Hood Emblem, Parts Thanks. I'll check it out. I still have the original one on the truck, just looking for a new replacement. May try to find someone to restore the one I have, if possible.

02-15-2022, 03:45 PM	#3
jhvaughn Registered User Join Date: Mar 2016 Location: Helena, AL Posts: 53	Re: 1960 C10 Apache Hood Emblem, Parts Thanks! I found the side emblems but am still searching for the hood emblem. Will check out Car and Truck shop catalog.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.