ID a Part Please & WIW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 03-15-2022, 05:52 PM

Have had this for some time, acquired it along with a bunch of truck parts awhile back. Was told it was for a Blazer spare tire mount at the time but it's not familiar to me at all. I had a 71 Blazer K5 years ago (like a dumba** I sold it, LOL) with the outside swing away spare tire mount. The double angle bent section is a solid one piece tube with the center triangular piece welded to the tube. The channeled arm bolts to that section near the triangular center section. Is the channel piece bent or twisted or is it correct for mounting in that manner? All three tube ends have a flattened bolt hole mount. Is this for the newer square body Blazers? Never had one of those so am clueless. Any help with an identification, years of application and a value would be much appreciated.

**too much stuff** · 03-15-2022, 06:51 PM

Looks like a square body spare tire carrier. Not sure exactly what years. Have seen them for sale in the $100 range in the past.

**Ironhorse** · 03-15-2022, 08:37 PM

Thanks for the reply and the info Eric. Guess what I was told when I got it was pretty close then altho no mention of what years Blazer it would fit. Have no square body Blazer so guess it would be cheaper for me to sell it than buy a Blazer, LOL. Thanks again, much appreciate the response.

03-15-2022, 05:52 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	ID a Part Please & WIW Have had this for some time, acquired it along with a bunch of truck parts awhile back. Was told it was for a Blazer spare tire mount at the time but it's not familiar to me at all. I had a 71 Blazer K5 years ago (like a dumba** I sold it, LOL) with the outside swing away spare tire mount. The double angle bent section is a solid one piece tube with the center triangular piece welded to the tube. The channeled arm bolts to that section near the triangular center section. Is the channel piece bent or twisted or is it correct for mounting in that manner? All three tube ends have a flattened bolt hole mount. Is this for the newer square body Blazers? Never had one of those so am clueless. Any help with an identification, years of application and a value would be much appreciated. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

03-15-2022, 06:51 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: ID a Part Please & WIW Looks like a square body spare tire carrier. Not sure exactly what years. Have seen them for sale in the $100 range in the past. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-15-2022, 08:37 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: ID a Part Please & WIW Thanks for the reply and the info Eric. Guess what I was told when I got it was pretty close then altho no mention of what years Blazer it would fit. Have no square body Blazer so guess it would be cheaper for me to sell it than buy a Blazer, LOL. Thanks again, much appreciate the response. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.