65 GMC Turn signal identification

[KVB]

I have the switch shown in the attached picture, in my 65 GMC. I need to replace the metal strips shown in the lower right portion.

I am not sure of the type of switch. Is it truly a GMC switch, or is it a Chevrolet (1963?) type switch.

I have bent one of the metal strips, and it seems I have to replace the whole switch, I just don’t know what to order.

Thanks in advance.

Ken
Posted via Mobile Device

[The Rocknrod]

Maybe it's different on GMC I do not know for sure but here is a switch that says it's for both Chevy and GMC - https://www.rockauto.com/en/parts/ac...al+switch,4832

[KVB]

Originally Posted by The Rocknrod

Maybe it's different on GMC I do not know for sure but here is a switch that says it's for both Chevy and GMC - https://www.rockauto.com/en/parts/ac...al+switch,4832

I know of that one on Rockauto, but unless I can the section of the switch that I require, I am hesitant to order it.

It seems that what I have in my GMC, could be a Chevy part. Not that I am biased, I just want confirmation.
Posted via Mobile Device

[slorio]

65 GMC typically uses 1963 Chevy switch.

I hope that helps.
Regards
Steve
New Orleans

[KVB]

I was able to buy the missing component from a local 60-66 fan. Thanks Eric!