|
05-26-2022, 06:34 PM | #1 |
Registered User
Join Date: May 2005
Location: Blackfalds, Alberta
Posts: 604
|
1969 GMC Burb Build
Sitting here bored right now, so though what the heck, I'll start a thread about my 'Burb that I bought last fall and show my progress on it.
I wasn't really on the lookout for one, but being a sucker for anything 67-72 related and given how few Burb's are up here, I saw this one and decided to pull the trigger on it. If you've heard/seen the tv show "Rust Valley Restorers" (I think its on Motor Trend now), I got it from Mike Hall. These first pics are from the day I brought it home. Looks rough in some places, but its incredibly clean underneath. It's hasn't seen the roads in at least 20 years and was originally imported from California back around 2004. Rockers, cab supports, floors are all super solid. It's got repainted a long time ago at some point, and in spots the original white paint is coming through. There are some some spots with filler that I'm nervous what is underneath (specifically barn doors and driver side rear quarter panel), but the underside of this truck being so clean has me optimistic.
__________________
1971 Chevrolet K10 - SWB, 5.3LS, 4L60e 1970 Chevrolet K5 Blazer - Project 1969 Chevrolet C10 - SWB, 350 Holley Sniper, 700r4 1969 GMC Suburban - 5.3 LS, 4L60e Last edited by hevy_chevy67; 05-27-2022 at 05:44 PM. |
05-26-2022, 06:44 PM | #2 |
Registered User
Join Date: May 2005
Location: Blackfalds, Alberta
Posts: 604
|
Re: 1969 GMC Burb Build
First order of business is getting this thing road worthy. It had no drivetrain so it made it an easy decision to go LS on this one. I've never done an LS swap before so all new to me.
Basic plan is to go through all the mechanical, 5 lug conversion, 3.5/5 lowering kit, 5.3/4l60e, and some 20" rims. Get it back on the road and driving how I want, and then maybe in future hit the body & paint. Maybe, that part I'm still undecided on what to do.
__________________
1971 Chevrolet K10 - SWB, 5.3LS, 4L60e 1970 Chevrolet K5 Blazer - Project 1969 Chevrolet C10 - SWB, 350 Holley Sniper, 700r4 1969 GMC Suburban - 5.3 LS, 4L60e |
05-26-2022, 06:51 PM | #3 |
Registered User
Join Date: May 2005
Location: Blackfalds, Alberta
Posts: 604
|
Re: 1969 GMC Burb Build
After some wire wheel work it looks a lot better with some fresh paint.
Went with the CPP kit for brakes and front end lowering. Drop spindles and 1" spring. Also got my donor 5.3 on the stand. Low milage that came from a 2002 truck. In process of cleaning up. Not going crazy with it and keeping it bone stock for time bein. Going to replace some some seals, knock sensors, and rear main while I have it out.
__________________
1971 Chevrolet K10 - SWB, 5.3LS, 4L60e 1970 Chevrolet K5 Blazer - Project 1969 Chevrolet C10 - SWB, 350 Holley Sniper, 700r4 1969 GMC Suburban - 5.3 LS, 4L60e Last edited by hevy_chevy67; 05-26-2022 at 06:54 PM. Reason: flip picture |
05-27-2022, 03:04 PM | #4 |
Registered User
Join Date: May 2005
Location: Blackfalds, Alberta
Posts: 604
|
Re: 1969 GMC Burb Build
Front wheels back on so ready for the 5.3 and 4l60e. I used motor mounts and crossmember from Animals Speed Shop here in Canada. Great kit and with the holes I put in the trailing arm crossmember should make make the exhaust routing nice and clean.
__________________
1971 Chevrolet K10 - SWB, 5.3LS, 4L60e 1970 Chevrolet K5 Blazer - Project 1969 Chevrolet C10 - SWB, 350 Holley Sniper, 700r4 1969 GMC Suburban - 5.3 LS, 4L60e |
05-27-2022, 03:22 PM | #5 |
Registered User
Join Date: May 2005
Location: Blackfalds, Alberta
Posts: 604
|
Re: 1969 GMC Burb Build
First LS swap I'm doing, so I went and bought a harness as I want to make this as easy as possible. I went with Speartech, super happy with quality. Only thing I don't like is I'm limited to where I can put my ECM. I had to attach it to the driver side inner fender.
I used a new radiator from RnD Fabrication. Inlet is on the passenger side and a port built in for the steam vent. Headers I went with long tube from Speed Engineering. Cold air intake I bought from eBay. It was super cheap $$ wise but looks ok. I'm not keeping that filter and will be putting a K&N one on before I roll this thing out of the shop. I also moved the battery to the driver side.
__________________
1971 Chevrolet K10 - SWB, 5.3LS, 4L60e 1970 Chevrolet K5 Blazer - Project 1969 Chevrolet C10 - SWB, 350 Holley Sniper, 700r4 1969 GMC Suburban - 5.3 LS, 4L60e |
05-27-2022, 06:01 PM | #6 |
Registered User
Join Date: May 2005
Location: Blackfalds, Alberta
Posts: 604
|
Re: 1969 GMC Burb Build
Some other odds and ends I've put on along the way.
Aluminum fuel tank made by a local fabricator. Top notch quality and is as good or better then anything out there on the market. He sells them drop in ready, just hook up the lines and go. Going with a one piece driveshaft. I think it measured around 66" or 67" inches. No clearance issues in the trailing arm crossmember. I went with Dakota digital gauges. Long wait to get them but wow they sure are nice.
__________________
1971 Chevrolet K10 - SWB, 5.3LS, 4L60e 1970 Chevrolet K5 Blazer - Project 1969 Chevrolet C10 - SWB, 350 Holley Sniper, 700r4 1969 GMC Suburban - 5.3 LS, 4L60e |
10-05-2022, 07:01 AM | #7 |
low n' slo
Join Date: Mar 2009
Location: rosenberg, texas
Posts: 5,175
|
Re: 1969 GMC Burb Build
just noticed you went with a one piece driveshaft? any issues? I'm getting ready to have one made and wanted to go 1 piece but mine has air ride. don't know if a driveshaft with that big diameter will fit with suspension that low!
__________________
67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____|__|__\__ ,.,,,.,.,,.,|_O _______ O_] |
10-05-2022, 11:57 AM | #8 | |
Registered User
Join Date: May 2005
Location: Blackfalds, Alberta
Posts: 604
|
Re: 1969 GMC Burb Build
Quote:
I was a little hesitant on going to a one piece, but the guy who built it said I was good to go so I trusted him. Reputable local shop.
__________________
1971 Chevrolet K10 - SWB, 5.3LS, 4L60e 1970 Chevrolet K5 Blazer - Project 1969 Chevrolet C10 - SWB, 350 Holley Sniper, 700r4 1969 GMC Suburban - 5.3 LS, 4L60e |
|
10-05-2022, 12:23 PM | #9 |
low n' slo
Join Date: Mar 2009
Location: rosenberg, texas
Posts: 5,175
|
Re: 1969 GMC Burb Build
that looks good us Burban guys have a lot more work to do to make clearance if it hits up there. did he order the yokes too.. or you brought him the old driveshaft to go off of?
__________________
67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____|__|__\__ ,.,,,.,.,,.,|_O _______ O_] |
10-05-2022, 12:34 PM | #10 |
Registered User
Join Date: May 2005
Location: Blackfalds, Alberta
Posts: 604
|
Re: 1969 GMC Burb Build
All new yoke and everything. Old driveshaft was missing when I got the Burb.
__________________
1971 Chevrolet K10 - SWB, 5.3LS, 4L60e 1970 Chevrolet K5 Blazer - Project 1969 Chevrolet C10 - SWB, 350 Holley Sniper, 700r4 1969 GMC Suburban - 5.3 LS, 4L60e |
10-08-2022, 05:35 AM | #11 |
Senior Member
Join Date: Sep 2018
Location: Belmont OH
Posts: 295
|
Re: 1969 GMC Burb Build
Burb looks great ! Outstanding job, nice to see another Suburban has been reborn and back on the road
|
10-13-2022, 01:50 PM | #12 | |
Registered User
Join Date: May 2005
Location: Blackfalds, Alberta
Posts: 604
|
Re: 1969 GMC Burb Build
Quote:
I certainly have a few things to finish up over the winter once its parked in the next couple weeks. Carpet/sound deadener, fuel gauge isn't working, and some other interior odds and ends. Gotta admit though, feels great seeing it driving when a little over a year ago it was rotting away in a field. Doing the LS in this has got me going down the path of swapping my K10 over the winter now too.
__________________
1971 Chevrolet K10 - SWB, 5.3LS, 4L60e 1970 Chevrolet K5 Blazer - Project 1969 Chevrolet C10 - SWB, 350 Holley Sniper, 700r4 1969 GMC Suburban - 5.3 LS, 4L60e |
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|