1960 clutch pedal problem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mister319 · 07-30-2022, 06:30 PM

The shaft on my clutch pedal has the rectangular bar on the end instead of the splines, and it has broken it seems like my only option is to replace the whole clutch brake pedal assembly, or weld the old one, has anyone had success in welding that bar back on?

**62bagger** · 07-30-2022, 10:45 PM

Do you have a picture of what you are describing?

Mister319 · 07-31-2022, 02:28 AM

The splined shaft is bigger in dia it will not work without changing the whole assembly.

Grounded63 · 07-31-2022, 03:11 PM

As long as you vee groove the joint out, so you get good penatration. It would probably be fine, as long as that is a weldable steel. That darker brown finish, ( if that's the natural finish ) rather than Grey. Makes it look very similar to 1144 sp, which doesn't have good welding properties.

It looks like a pretty simple part, at least on that one end. You might look into having a local machinist making you a duplicate of it. As one option.

**slepysal** · 10-21-2022, 12:58 AM

did you get it sorted out?

Mister319 · 10-21-2022, 01:08 AM

Yes I did thank you, I had it welded and it is doing fine.I determined that what caused it to break is that the pushrod that goes into the clutch side of the master cylinder,had somehow turned itself on it's threads and became to long causing it to bottom out in the master cylinder.

**slepysal** · 10-21-2022, 01:36 AM

Good to hear! I think mine is broken nice to know it's weldable Thanks

07-30-2022, 06:30 PM	#1
Mister319 Registered User Join Date: Apr 2018 Location: Azusa California Posts: 13	1960 clutch pedal problem The shaft on my clutch pedal has the rectangular bar on the end instead of the splines, and it has broken it seems like my only option is to replace the whole clutch brake pedal assembly, or weld the old one, has anyone had success in welding that bar back on?

07-30-2022, 10:45 PM	#2
62bagger Senior Member Join Date: Mar 2016 Location: Sonora California Posts: 285	Re: 1960 clutch pedal problem Do you have a picture of what you are describing?

07-31-2022, 02:28 AM	#3
Mister319 Registered User Join Date: Apr 2018 Location: Azusa California Posts: 13	Re: 1960 clutch pedal problem The splined shaft is bigger in dia it will not work without changing the whole assembly. Attached Images

07-31-2022, 03:11 PM	#4
Grounded63 Registered User Join Date: Dec 2016 Location: Canon City, Colorado Posts: 124	Re: 1960 clutch pedal problem As long as you vee groove the joint out, so you get good penatration. It would probably be fine, as long as that is a weldable steel. That darker brown finish, ( if that's the natural finish ) rather than Grey. Makes it look very similar to 1144 sp, which doesn't have good welding properties. It looks like a pretty simple part, at least on that one end. You might look into having a local machinist making you a duplicate of it. As one option.

10-21-2022, 12:58 AM	#5
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: 1960 clutch pedal problem did you get it sorted out? __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

10-21-2022, 01:08 AM	#6
Mister319 Registered User Join Date: Apr 2018 Location: Azusa California Posts: 13	Re: 1960 clutch pedal problem Yes I did thank you, I had it welded and it is doing fine.I determined that what caused it to break is that the pushrod that goes into the clutch side of the master cylinder,had somehow turned itself on it's threads and became to long causing it to bottom out in the master cylinder.

10-21-2022, 01:36 AM	#7
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: 1960 clutch pedal problem Good to hear! I think mine is broken nice to know it's weldable Thanks __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.