Stock height from axle to wheelwell opening - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WB72 · 01-04-2004, 02:44 PM

Does anyone have a measurement from the center of the axle to the top of the wheel opening from a C-10? as well as theFront

I have a C-20 and I am converting it to a 1/2 ton. My measurements are:
Front: 19"
Rear: 21".

Any help will be appreciated.

SWEET7T · 01-04-2004, 03:49 PM

Try this thread, it was already discussed...

previous thread

01-04-2004, 02:44 PM	#1
WB72 Before and After Join Date: Feb 2000 Location: Leduc, Alberta CANADA Posts: 632	Stock height from axle to wheelwell opening Does anyone have a measurement from the center of the axle to the top of the wheel opening from a C-10? as well as theFront I have a C-20 and I am converting it to a 1/2 ton. My measurements are: Front: 19" Rear: 21". Any help will be appreciated. __________________ Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA

01-04-2004, 03:49 PM	#2
SWEET7T Try spinnin 4 rear tars Join Date: Sep 2003 Location: Salt Lake City, Utah Posts: 757	Try this thread, it was already discussed... previous thread __________________ SWEET7T 1970 C10, 2wd, LB, 307/TH350/3.08. PS, PB

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.