1960 budget lowering shocks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**slepysal** · 06-11-2023, 12:08 PM

I picked up some wheels on Offer up for a killer deal the rears are a tight fit but no rubbing.
Name: IMG_2216.jpg
Views: 240
Size: 54.2 KB

The front shocks started making a groaning noise so I decided it was time to replace them. They were KYB #KG5452
Name: IMG_2228.jpg
Views: 238
Size: 51.4 KB

Name: IMG_2228.jpg
Views: 238
Size: 51.4 KB

Not wanting to spend $55.00 each I crossed referenced them and came up with Monroe#32194 ( off of 1989 s10 Blazer) for 20.00 ea.
Name: IMG_2229.jpg
Views: 231
Size: 53.3 KB

Name: IMG_2229.jpg
Views: 231
Size: 53.3 KB

Name: IMG_2230.jpg
Views: 237
Size: 55.4 KB

They required some slight mods to fit.

**slepysal** · 06-11-2023, 12:17 PM

The Monroe's have a bushing on both ends. The lower one needs to be removed. Simple to do using a puller, 11mm drive , rachet ,and some silicone spray. Drop the 11 mm socket in the eyelet and press out

Name: 2231.jpg
Views: 214
Size: 58.1 KB

Name: IMG_2234.jpg
Views: 200
Size: 43.6 KB

Name: IMG_2232.jpg
Views: 194
Size: 40.7 KB

Name: IMG_2235.jpg
Views: 186
Size: 35.7 KB

Name: IMG_2236.jpg
Views: 200
Size: 42.5 KB

**slepysal** · 06-11-2023, 12:24 PM

The upper bushing needs to be ground down a bit about 1/4" or so
Name: IMG_2239.jpg
Views: 194
Size: 39.4 KB

Name: IMG_2242.jpg
Views: 199
Size: 36.9 KB

I used my non CAL-OSHA approved angle grinder
Name: IMG_2240.jpg
Views: 199
Size: 77.7 KB

Nice ride and I saved some cash.
Name: IMG_2243.jpg
Views: 196
Size: 47.5 KB

AcampoDave · 06-11-2023, 10:26 PM

Nice ride...saved cash...and the wheels look great. A triple play!

**slepysal** · 06-12-2023, 09:03 PM

Thanks !!

jchav62 · 06-13-2023, 10:10 AM

Mr. Sal! It's nice to see you and your ride are still in action...

Great info!

**slepysal** · 06-13-2023, 08:17 PM

Mr. Joe!!! I'm still kicking and cruising !!! Good to hear from you !

**MusicMan70** · 06-13-2023, 11:21 PM

Great write up Slepysal! Thanks for the detail and part numbers as well

**slepysal** · 06-13-2023, 11:42 PM

Thank you

**ChiefRocka** · 06-14-2023, 01:48 PM

Hey SAL...

Still looking good my man !!

**slepysal** · 06-14-2023, 08:31 PM

Hey John!! Hope all is well

06-11-2023, 12:08 PM	#1
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	1960 budget lowering shocks I picked up some wheels on Offer up for a killer deal the rears are a tight fit but no rubbing. The front shocks started making a groaning noise so I decided it was time to replace them. They were KYB #KG5452 Not wanting to spend $55.00 each I crossed referenced them and came up with Monroe#32194 ( off of 1989 s10 Blazer) for 20.00 ea. They required some slight mods to fit. __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

06-11-2023, 12:17 PM	#2
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: 1960 budget lowering shocks The Monroe's have a bushing on both ends. The lower one needs to be removed. Simple to do using a puller, 11mm drive , rachet ,and some silicone spray. Drop the 11 mm socket in the eyelet and press out __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

06-11-2023, 10:26 PM	#4
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,778	Re: 1960 budget lowering shocks Nice ride...saved cash...and the wheels look great. A triple play!

06-12-2023, 09:03 PM	#5
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: 1960 budget lowering shocks Thanks !! __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

06-13-2023, 10:10 AM	#6
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 1960 budget lowering shocks Mr. Sal! It's nice to see you and your ride are still in action... Great info! __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

06-11-2023, 12:24 PM	#3
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: 1960 budget lowering shocks The upper bushing needs to be ground down a bit about 1/4" or so I used my non CAL-OSHA approved angle grinder Nice ride and I saved some cash. __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

06-13-2023, 08:17 PM	#7
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: 1960 budget lowering shocks Mr. Joe!!! I'm still kicking and cruising !!! Good to hear from you ! __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

06-13-2023, 11:21 PM	#8
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,842	Re: 1960 budget lowering shocks Great write up Slepysal! Thanks for the detail and part numbers as well __________________ MusicMan70 1961 GMC Suburban

06-13-2023, 11:42 PM	#9
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: 1960 budget lowering shocks Thank you __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

06-14-2023, 01:48 PM	#10
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: 1960 budget lowering shocks Hey SAL... Still looking good my man !! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

06-14-2023, 08:31 PM	#11
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: 1960 budget lowering shocks Hey John!! Hope all is well __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.