PA 1968 C20 partout - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Burnsy01** · 03-02-2024, 06:16 PM

This ones a little rough folks. 68 C20 , 250 3 on the tree. Anything you can see is up for grabs but to hit the big points-

250 Motor/ Tranny- supposedly ran before they pulled the carb. $300

HO rear end- unknown ratio but it isnt frozen up. $150

Tailgate- rough , slightly bent on the inside, and rusty on the bottom seam but would be good for a beater truck or a bench maybe??? $125

Hood- Inside structure is actually in really good shape, starting to have some rust issues. Is dented, once again good for a beater $50

Hood hinges- good shape $65+ shipping

Radio dash cut $80+ shipping

Located in Conneaut Lake pa, many other parts available

**michael bustamante** · 03-04-2024, 10:51 AM

dang i could use that rear end too..
price and condition of fenders?

**Burnsy01** · 03-04-2024, 11:06 AM

Quote:

Originally Posted by michael bustamante

dang i could use that rear end too..
price and condition of fenders?

Fenders are super rough, they have about 2" of bondo on them lol. I do have a repop 67 driverside fender and a decent 68 Pass fender.

**michael bustamante** · 03-04-2024, 01:22 PM

damn thats a bit too far for me to go for that rear end.. ugh,,,,,

**Burnsy01** · 03-04-2024, 01:23 PM

Quote:

Originally Posted by michael bustamante

damn thats a bit too far for me to go for that rear end.. ugh,,,,,

I can ship via freight but it won’t be cheap

**michael bustamante** · 03-04-2024, 02:01 PM

itd be miserable to freight that heavy rear end, and probably about 600.00 to freight it. but thank you

**Rods** · 03-04-2024, 06:20 PM

How much for the lic plate ?

**Burnsy01** · 03-05-2024, 09:24 AM

Quote:

Originally Posted by Rods

How much for the lic plate ?

Shes kinda beat lol. Ill do it for $20 shipped

**Rods** · 03-05-2024, 10:12 AM

Quote:

Originally Posted by Burnsy01

Shes kinda beat lol. Ill do it for $20 shipped

We will take it…….

PM sent

**michael bustamante** · 03-04-2024, 06:45 PM

how much for them rear bumper brackets?

**Burnsy01** · 03-05-2024, 09:25 AM

Quote:

Originally Posted by michael bustamante

how much for them rear bumper brackets?

$50 shipped?

**michael bustamante** · 03-05-2024, 10:37 AM

Quote:

Originally Posted by Burnsy01

$50 shipped?

sounds decent.. if you could send a pic when you can... just wanna mke sure theyre the right ones and nor rusted thru and such

**Burnsy01** · 03-05-2024, 10:40 AM

Quote:

Originally Posted by michael bustamante

sounds decent.. if you could send a pic when you can... just wanna mke sure theyre the right ones and nor rusted thru and such

Yup no problem if you want to PM me your number I can send pics over at noon.

Thanks!
Nick

**pjmoreland** · 03-05-2024, 12:13 PM

What's the condition of the front turn signal light housings?

jaybatta · 03-05-2024, 11:57 PM

I don’t see them, but is there any headlight eyebrow trim?

Thanks

**Burnsy01** · 03-10-2024, 11:44 PM

Quote:

Originally Posted by jaybatta

I don’t see them, but is there any headlight eyebrow trim?

Thanks

No headlight trim Sorry

Nick

D-n-Tyke · 03-11-2024, 01:35 AM

If it is in good solid shape and you are interested in cutting pieces out of the cab I am looking for the are of the inner cowl by where the outter cowl bolts on.

**Burnsy01** · 03-11-2024, 07:44 AM

Quote:

Originally Posted by D-n-Tyke

If it is in good solid shape and you are interested in cutting pieces out of the cab I am looking for the are of the inner cowl by where the outter cowl bolts on.

Sure, Passenger side?

D-n-Tyke · 03-11-2024, 11:43 AM

Quote:

Originally Posted by Burnsy01

Sure, Passenger side?

Yes passenger side.Cut out as shown or even maybe slightly bigger.

68Gold/white · 03-06-2024, 03:34 PM

Man, that would make a cool patina build!!!

**chev-obsession** · 03-07-2024, 01:35 AM

Are the hood latch bolts the original 12 point heads? If so, price ? Assuming they aren’t rusted to the point the threads are stripped when removed.

**Burnsy01** · 03-10-2024, 11:43 PM

Quote:

Originally Posted by chev-obsession

Are the hood latch bolts the original 12 point heads? If so, price ? Assuming they aren’t rusted to the point the threads are stripped when removed.

No 12 points sorry

bddcustoms · 03-21-2024, 09:55 AM

Looking 67/68 for side molding trim pieces:
both doors
both cab corners
both bed sides
one rear wheel arch

Let me know if you can help

Quote:

Originally Posted by Burnsy01

This ones a little rough folks. 68 C20 , 250 3 on the tree. Anything you can see is up for grabs but to hit the big points-

250 Motor/ Tranny- supposedly ran before they pulled the carb. $300

HO rear end- unknown ratio but it isnt frozen up. $150

Tailgate- rough , slightly bent on the inside, and rusty on the bottom seam but would be good for a beater truck or a bench maybe??? $125

Hood- Inside structure is actually in really good shape, starting to have some rust issues. Is dented, once again good for a beater $50

Hood hinges- good shape $65+ shipping

Radio dash cut $80+ shipping

Located in Conneaut Lake pa, many other parts available

**Burnsy01** · 03-21-2024, 10:07 AM

Quote:

Originally Posted by bddcustoms

Looking 67/68 for side molding trim pieces:
both doors
both cab corners
both bed sides
one rear wheel arch

Let me know if you can help

Hey! I have some of that. Check this thread for pictures of what I have.

https://67-72chevytrucks.com/vboard/...d.php?t=850480

bddcustoms · 03-21-2024, 11:35 AM

Just PM'd you. Let me know

Thx
DTT

03-02-2024, 06:16 PM	#1
Burnsy01 Chevy Freak Join Date: Aug 2019 Location: Conneaut Lake , Pennsylvania Posts: 225	1968 C20 partout This ones a little rough folks. 68 C20 , 250 3 on the tree. Anything you can see is up for grabs but to hit the big points- 250 Motor/ Tranny- supposedly ran before they pulled the carb. $300 HO rear end- unknown ratio but it isnt frozen up. $150 Tailgate- rough , slightly bent on the inside, and rusty on the bottom seam but would be good for a beater truck or a bench maybe??? $125 Hood- Inside structure is actually in really good shape, starting to have some rust issues. Is dented, once again good for a beater $50 Hood hinges- good shape $65+ shipping Radio dash cut $80+ shipping Located in Conneaut Lake pa, many other parts available Attached Images __________________ Nick 71 K20 5.9 p pump cummins (in progress) 68 Camaro 454BBC 86 Camaro 5.3LS turbo

03-04-2024, 10:51 AM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,879	Re: 1968 C20 partout dang i could use that rear end too.. price and condition of fenders? __________________ 1967custom

03-04-2024, 01:22 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,879	Re: 1968 C20 partout damn thats a bit too far for me to go for that rear end.. ugh,,,,, __________________ 1967custom

03-04-2024, 02:01 PM	#6
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,879	Re: 1968 C20 partout itd be miserable to freight that heavy rear end, and probably about 600.00 to freight it. but thank you __________________ 1967custom

03-04-2024, 06:20 PM	#7
Rods Senior Member Join Date: Aug 2014 Location: Arizona Posts: 1,488	Re: 1968 C20 partout How much for the lic plate ? __________________ Az

03-04-2024, 06:45 PM	#10
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,879	Re: 1968 C20 partout how much for them rear bumper brackets? __________________ 1967custom

03-05-2024, 12:13 PM	#14
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,124	Re: 1968 C20 partout What's the condition of the front turn signal light housings?

03-05-2024, 11:57 PM	#15
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 841	Re: 1968 C20 partout I don’t see them, but is there any headlight eyebrow trim? Thanks __________________ Joe 1968 K20 1970 K20 Semper Fi

03-11-2024, 01:35 AM	#17
D-n-Tyke Registered User Join Date: Aug 2016 Location: El Cajon, CA Posts: 295	Re: 1968 C20 partout If it is in good solid shape and you are interested in cutting pieces out of the cab I am looking for the are of the inner cowl by where the outter cowl bolts on. Attached Images

03-06-2024, 03:34 PM	#20
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,441	Re: 1968 C20 partout Man, that would make a cool patina build!!!

03-07-2024, 01:35 AM	#21
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,514	Re: 1968 C20 partout Are the hood latch bolts the original 12 point heads? If so, price ? Assuming they aren’t rusted to the point the threads are stripped when removed. __________________ 1965 c/10 swb 1969 c/10 lwb

03-21-2024, 11:35 AM	#25
bddcustoms Registered User Join Date: Apr 2009 Location: Bowie, Maryland Posts: 80	Re: 1968 C20 partout Just PM'd you. Let me know Thx DTT __________________ broke d!@k dog Garage 1969 C20 - Project: "Big Sexy" [http://67-72chevytrucks.com/vboard/s...d.php?t=454894] 2003 'Burban - [Big Pop's daily driver] 1969 350/350 Stingray - [as soon as the economy turns...] 1939 Chevy Roadster Pick Up - Project: "Pre-School" (searching now)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.