Anyone using bags for lifting ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

slam33 · 01-12-2004, 11:49 PM

I talked to a guy that says I could run a 3 bellows bag on the front of my 1/2T stock front that would give me a 2'" lift and a better ride than the coils. Anyone ever try this ?

Izzy · 01-13-2004, 10:35 AM

I’ve seen them used in lifts but you’ll need to fab an upper/lower mount you can’t just swap it in for the coil.

Effle18 · 01-19-2004, 05:32 PM

I just bought a truck that has bags. Don't know much about them cause I bought it this way. The PO (previous owner) said he did the bags cause the springs were a rough ride.

01-12-2004, 11:49 PM	#1
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Anyone using bags for lifting ? I talked to a guy that says I could run a 3 bellows bag on the front of my 1/2T stock front that would give me a 2'" lift and a better ride than the coils. Anyone ever try this ? __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

01-19-2004, 05:32 PM	#3
Effle18 Registered User Join Date: Jan 2004 Location: Dallas, Tx Posts: 94	I just bought a truck that has bags. Don't know much about them cause I bought it this way. The PO (previous owner) said he did the bags cause the springs were a rough ride. __________________ 96 Bagged 2Door Tahoe 69 Blazer

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-13-2004, 10:35 AM	#2
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	I’ve seen them used in lifts but you’ll need to fab an upper/lower mount you can’t just swap it in for the coil.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.