Light bulb sockets needed.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mike76251 · 01-16-2004, 08:12 AM

I need 6 or so tailight sockets (1157 bulbs) and 6 or so 168/194 side marker sockets.
They must be usable and have at least 1" of wire left.
Thanks,
PM me

bigblock73 · 01-16-2004, 10:03 AM

I might have some of the stuff you need. I am going to be running a Pinnless wiring kit...so my old wiring harness will be tossed. I actually have the harness off the truck and in a box...but I don't have all the stuff you need (quanity).

Interested still?

**old Rusty C10** · 01-16-2004, 12:09 PM

i have a rear bed harness for sale too thats two and two plus extra wire add that to bigvlocks harness and youre set
for mine $15 plus ride?

Mike76251 · 01-17-2004, 01:41 AM

Yes,Yes,Yes
Just remember...........all I need is the sockets.

With "just the sockets" in mind and not the whole harness, how much for ride Bob? To 35674 BTW

Mike76251 · 01-17-2004, 01:46 AM

Email sent Jeff.
Thanks

Mike76251 · 01-17-2004, 01:48 AM

Quote:

Originally posted by bigblock73
I might have some of the stuff you need. I am going to be running a Pinnless wiring kit...so my old wiring harness will be tossed. I actually have the harness off the truck and in a box...but I don't have all the stuff you need (quanity).

Interested still?

BTW.....that Painless setup is the best there is.
I just wish GM would have used it to begin with!

Gregsmx · 01-17-2004, 02:50 AM

Bigblock, I am in the midst of installing a painless kit. The only socket replacements they include are the front headlights. All of the other sockets have to be re-used.

It's a great kit, and a pleasure to install (after I stare at the instructions long enough!)

Also, the old wiring harness makes for a great go-by.

Mike76251, don't mean to highjack your thread but I think bigblock should keep his harness until the new kit is fully installed.

Ground wires are also few and far between in the painless kit, so robbing from the old one is necesssary in certain circuits if you want to stay with black wires for grounds. There are plenty of spare wires that can also be used for grounds.

bigblock73 · 01-17-2004, 11:44 AM

Greg, are you installing the Painless 73-87 specific kit? I have the kit in my possesion, but have not taken it completely out of the box because I am afraid I won't be able to get it back in.

If you do, then Mike...I better keep my harness I guess...otherwise I'd have to go out and find more.

Gregsmx · 01-17-2004, 06:23 PM

It's part no 10205 18 circuit, '73- '87. If you haven't taken it out of the box, the cover photo shows all that's there.

01-16-2004, 08:12 AM	#1
Mike76251 Senior Member Join Date: Mar 2003 Posts: 2,499	Light bulb sockets needed.... I need 6 or so tailight sockets (1157 bulbs) and 6 or so 168/194 side marker sockets. They must be usable and have at least 1" of wire left. Thanks, PM me

01-16-2004, 10:03 AM	#2
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	I might have some of the stuff you need. I am going to be running a Pinnless wiring kit...so my old wiring harness will be tossed. I actually have the harness off the truck and in a box...but I don't have all the stuff you need (quanity). Interested still? __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-16-2004, 12:09 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	i have a rear bed harness for sale too thats two and two plus extra wire add that to bigvlocks harness and youre set for mine $15 plus ride? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-17-2004, 02:50 AM	#7
Gregsmx Registered User Join Date: Jan 2003 Location: San Antonio Tx Posts: 338	Bigblock, I am in the midst of installing a painless kit. The only socket replacements they include are the front headlights. All of the other sockets have to be re-used. It's a great kit, and a pleasure to install (after I stare at the instructions long enough!) Also, the old wiring harness makes for a great go-by. Mike76251, don't mean to highjack your thread but I think bigblock should keep his harness until the new kit is fully installed. Ground wires are also few and far between in the painless kit, so robbing from the old one is necesssary in certain circuits if you want to stay with black wires for grounds. There are plenty of spare wires that can also be used for grounds. __________________ '75 Blazer RAT 4X4 "BLAZIN" - Custom frame off Here's the website I'm uploading pics to: Greg's frame off project

01-17-2004, 11:44 AM	#8
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Greg, are you installing the Painless 73-87 specific kit? I have the kit in my possesion, but have not taken it completely out of the box because I am afraid I won't be able to get it back in. If you do, then Mike...I better keep my harness I guess...otherwise I'd have to go out and find more. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-17-2004, 01:41 AM	#4
Mike76251 Senior Member Join Date: Mar 2003 Posts: 2,499	Yes,Yes,Yes Just remember...........all I need is the sockets. With "just the sockets" in mind and not the whole harness, how much for ride Bob? To 35674 BTW

01-17-2004, 01:46 AM	#5
Mike76251 Senior Member Join Date: Mar 2003 Posts: 2,499	Email sent Jeff. Thanks

01-17-2004, 06:23 PM	#9
Gregsmx Registered User Join Date: Jan 2003 Location: San Antonio Tx Posts: 338	It's part no 10205 18 circuit, '73- '87. If you haven't taken it out of the box, the cover photo shows all that's there. __________________ '75 Blazer RAT 4X4 "BLAZIN" - Custom frame off Here's the website I'm uploading pics to: Greg's frame off project

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.