driveshaft safety loop?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 03-28-2004, 03:10 PM

where can i find one of these for out trucks?

low 84 · 03-28-2004, 04:47 PM

just get a universal one from jegs

ocbaud · 03-28-2004, 04:48 PM

i couldnt ever find one on their site.

ocbaud · 03-28-2004, 04:49 PM

http://www.jegs.com/cgi-bin/ncommerc...29&prmenbr=361

nevermind. would that work?

*1FaastC10* · 03-28-2004, 08:43 PM

si, and its adjustable too, so you shouldnt have any road clearance problems. make sure to install it within 6" of the front u joint, so it will be track legal.

ocbaud · 03-29-2004, 02:08 AM

yeap. i'll need a helmet too

those are expensive

apstguy · 03-29-2004, 02:16 AM

$26 too expensive? This coming from a person with a brand new engine?

Summit:
http://store.summitracing.com/partde...art=CEE%2D3028
http://store.summitracing.com/partde...rt=LAK%2D18000
http://store.summitracing.com/partde...rt=SUM%2DG7900

apstguy · 03-29-2004, 02:20 AM

http://www.jegs.com/cgi-bin/ncommerc...31&prmenbr=361

ocbaud · 03-29-2004, 02:22 AM

Quote:

Originally posted by apstguy
$26 too expensive? This coming from a person with a brand new engine?

Summit:
http://store.summitracing.com/partde...art=CEE%2D3028
http://store.summitracing.com/partde...rt=LAK%2D18000
http://store.summitracing.com/partde...rt=SUM%2DG7900

the helmets are to expensive

apstguy · 03-29-2004, 02:35 AM

Ohh! ok. Duh - my bad. Well, I gave you more options.

gldevall · 03-30-2004, 03:08 PM

Quote:

Originally posted by ocbaud

the helmets are to expensive

I got a brand new DOT approved helmet off of Ebay for $35 shipped to the house. That's not expensive.

http://cgi.ebay.com/ebaymotors/ws/eB...&category=6749

TIMSPEED · 03-30-2004, 03:28 PM

Eric,
Make sure you get an SA00 rated helmet, as SA90's are going out at the end of this year. (Which means I need a new helmet, grrr!)

79BIG10 · 03-30-2004, 06:57 PM

I thought you only needed a loop and a helmet if you ran slicks? You planning on running slicks at the track?

gldevall · 03-30-2004, 11:26 PM

A helmet is required when you break into the 13's.

79BIG10 · 03-31-2004, 06:53 PM

Quote:

Originally posted by gldevall
A helmet is required when you break into the 13's.

Oh ok. Hopefully he can get there in the 13's with his setup.

ocbaud · 03-31-2004, 07:18 PM

Quote:

Originally posted by 79BIG10

Oh ok. Hopefully he can get there in the 13's with his setup.

i should be able to if i have traction

03-28-2004, 03:10 PM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	driveshaft safety loop?? where can i find one of these for out trucks?

03-28-2004, 04:47 PM	#2
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	just get a universal one from jegs __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

03-29-2004, 02:16 AM	#7
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	$26 too expensive? This coming from a person with a brand new engine? Summit: http://store.summitracing.com/partde...art=CEE%2D3028 http://store.summitracing.com/partde...rt=LAK%2D18000 http://store.summitracing.com/partde...rt=SUM%2DG7900 __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

03-29-2004, 02:20 AM	#8
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	http://www.jegs.com/cgi-bin/ncommerc...31&prmenbr=361 __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

03-29-2004, 02:35 AM	#10
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	Ohh! ok. Duh - my bad. Well, I gave you more options. __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

03-28-2004, 04:48 PM	#3
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	i couldnt ever find one on their site.

03-28-2004, 04:49 PM	#4
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	http://www.jegs.com/cgi-bin/ncommerc...29&prmenbr=361 nevermind. would that work?

03-28-2004, 08:43 PM	#5
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	si, and its adjustable too, so you shouldnt have any road clearance problems. make sure to install it within 6" of the front u joint, so it will be track legal.

03-29-2004, 02:08 AM	#6
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	yeap. i'll need a helmet too those are expensive

03-30-2004, 03:28 PM	#12
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Eric, Make sure you get an SA00 rated helmet, as SA90's are going out at the end of this year. (Which means I need a new helmet, grrr!) __________________ I have a few cars... See Them Here

03-30-2004, 06:57 PM	#13
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	I thought you only needed a loop and a helmet if you ran slicks? You planning on running slicks at the track? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

03-30-2004, 11:26 PM	#14
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	A helmet is required when you break into the 13's. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.