its official!

[1FaastC10]

swapped the cab from my C10 chassis to my K10 chassis yesterday, finally got the finishing touches on cleanup tonight. if any of you ever think about doing a cab swap by yourself, do yourself a huge favor. JUMP OFF A @!$% CLIFF! what a PITA it was. i put 4x4s under the rockers and jacked them up a few inches at a time, supporting it on jackstands. i needed 3 feet of clearance from the driveway to the bottom of the 4x4s in order to roll the K10 frame under it. thank god for cinder blocks and 24" jaskstands!

[N2TRUX]

Dang buddy, why don't you just hit yourself in the head with a hammer. I know you have lots of buddies that you are always helping on their trucks. Where the heck were they when you were doing this? I won't even go in to the unsafe sounding part of it.

I'll give you credit for being persistant though

[1FaastC10]

Ken, its all in being hard headed, persistant, and impatient. it doesnt help matters much that i'm not afraid to work hard to achieve my goals. all of my truck buddies are either sick, or are working 2nd shift, or my prime working time. Tim would've been more than willing to help, and he has told me so several times. just doesnt help that he lives 2 1/2 hours away. i wanted it done, and i wanted it done NOW. so i had one choice.

i got an IM on this when i posted it up on CK5. no, i didnt strip the interior out or the doors off, complete AC cab. so it was no lightweight.

[N2TRUX]

Originally Posted by 1FaastC10

Ken, its all in being hard headed, persistant, and impatient.....

Yeah but I already knew all that I was once all of those too. I replaced those fine qualities with bald headed, inconsistant, and constipated.

Ok, so I'll give you a nanner for your hard work and perserveriance. My next question is "where's tha pics"...

[Russell]

Thats when my skidsteer comes in being quite handy

Nicely done though man!

[85Silverado]

dang....me and my friend carried his cab when we did his frame off resto...granted there was nothing on it...no doors or anything...just the front and rear windshields...it was heavy but it was do-able as long as you didn't have to carry it to far.

[ocbaud]

you sound like me, very very impatiant

[swervin ervin]

Jeremy,

sounds like something I would have done. I don't have any truck buddies, so it's me or no one. I have buddies, or not really buddies, but guys who would help me I guess, but sometimes, you just don't want them in the way, you know? I guess I'm so danged pickey and anal, I do it by myself. This way if something's not right, I don't have anyone to blame but myself.

Cudos on the swap. I do admire folks who attempt and complete something of this nature. Most would wimp out and get a gang of guys over, buy beer and make a party of it. When I'm working on my truck, I prefer to leave the partys until the work is done. I've been through the drunken stupers and mechanicing before. It's not a pretty picture.

[1FaastC10]

Originally Posted by swervin ervin

This way if something's not right, I don't have anyone to blame but myself.

you mean like the dents in the back of my cab from the bulkhead? i attempted to get the 4x4s under the back of the cab myself last week, and ended up lifting the front, but not the back. my sister's boyfriend showed up and i had him strap the pipe i was using to lift the cab (as a lever, using the front 4x4 as the fulcrum) to the frame so i could get the 4x4 in, and then had him unstrap it when i was ready to drop it back down.