Cam, lifters and pushrods - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gldevall · 05-16-2004, 10:02 PM

Brand new, never used. Replaced with Comp cam before motor was installed. Stock from the 10067353 replacement 350. Cam specs are .390"/.410" lift and dur @ .050" 195º/202º.

Cam, lifters and pushrods

$50 plus shipping.

Thought I'd try here before going to ebay.

gldevall · 06-04-2004, 08:26 AM

This is the one I should have bumped.

Street Sled · 06-04-2004, 02:04 PM

How rough is the cam? May be interested....S/S

Destructo · 06-04-2004, 02:48 PM

With that duration should be a pretty smooth idle.

Russell · 06-04-2004, 03:30 PM

Lemme see how this compares to an X4262-H comp cam, I may end up buying this if the shipping isn't too bad to Canada, and it isn't too rough of a cam :P

gldevall · 06-04-2004, 08:27 PM

Its the stock cam from the universal 350.

gldevall · 06-04-2004, 08:32 PM

Here you go Russell

Xtreme Energy XE262H Hydraulic Flat Tappet Camshaft & Lifter Kit
Lift: .462''/.469''
Duration: 262°/270°
RPM Range: 1300-5600

Cam specs are .390"/.410" lift and dur @ .050" 195º/202º.

Russell · 06-04-2004, 09:05 PM

Ah, ok, I'm looking for something a bit bigger than stock, thanks anyways though

MSL · 06-08-2004, 07:09 AM

Is this still available and if so how much for shipping to 97502.

Thanks

gldevall · 06-08-2004, 08:44 AM

Quote:

Originally Posted by MSL

Is this still available and if so how much for shipping to 97502.

Thanks

$16 shipped to 97502

MSL · 06-09-2004, 04:09 AM

sold whats your addy so i can send out a money order.

Thanks Mike

gldevall · 06-09-2004, 08:39 AM

Mike, PM sent. Thanks.

gldevall · 06-10-2004, 08:19 AM

Sale pending.

MSL · 06-10-2004, 10:05 PM

Payment sent check your paypal.

Thanks Mike

gldevall · 06-10-2004, 10:48 PM

Payment received. Cam, lifters and pushrods SOLD. Thanks again Mike.

05-16-2004, 10:02 PM	#1
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Cam, lifters and pushrods Brand new, never used. Replaced with Comp cam before motor was installed. Stock from the 10067353 replacement 350. Cam specs are .390"/.410" lift and dur @ .050" 195º/202º. Cam, lifters and pushrods $50 plus shipping. Thought I'd try here before going to ebay. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-04-2004, 08:26 AM	#2
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	This is the one I should have bumped. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-04-2004, 02:04 PM	#3
Street Sled Registered User Join Date: Oct 2003 Location: Ohio Posts: 146	Cam,etc. How rough is the cam? May be interested....S/S

06-04-2004, 02:48 PM	#4
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	With that duration should be a pretty smooth idle. __________________ 1985 Scottsdale Shortbed 4x4 Stout 350 with some "upgrades"-700r4-33x12.5" Mud Tires, Warn 8274-50 winch. 2005 Chevrolet Colorado Regular Cab 2wd 4-banger, 5 speed, Street Pack with 3.73 axle.

06-04-2004, 03:30 PM	#5
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Lemme see how this compares to an X4262-H comp cam, I may end up buying this if the shipping isn't too bad to Canada, and it isn't too rough of a cam :P __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) Last edited by Russell; 06-04-2004 at 03:32 PM.

06-04-2004, 08:27 PM	#6
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Its the stock cam from the universal 350. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-04-2004, 08:32 PM	#7
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Here you go Russell Xtreme Energy XE262H Hydraulic Flat Tappet Camshaft & Lifter Kit Lift: .462''/.469'' Duration: 262°/270° RPM Range: 1300-5600 Cam specs are .390"/.410" lift and dur @ .050" 195º/202º. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-04-2004, 09:05 PM	#8
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Ah, ok, I'm looking for something a bit bigger than stock, thanks anyways though __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

06-08-2004, 07:09 AM	#9
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	Is this still available and if so how much for shipping to 97502. Thanks

06-09-2004, 04:09 AM	#11
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	sold whats your addy so i can send out a money order. Thanks Mike

06-09-2004, 08:39 AM	#12
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Mike, PM sent. Thanks. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-10-2004, 08:19 AM	#13
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Sale pending. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-10-2004, 10:05 PM	#14
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	Payment sent check your paypal. Thanks Mike

06-10-2004, 10:48 PM	#15
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Payment received. Cam, lifters and pushrods SOLD. Thanks again Mike.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.