![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered Smarta$$
Join Date: Mar 2004
Location: vancouver, wa
Posts: 214
|
![]()
i got some used turn signal lens with the harnnes. my question is that when hooked it up looked great, but when i check to see if it all work the drive side worked great. the passnager side is dim and the driver side binks dim. any info would help thanks
![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2004
Posts: 10
|
Turn signals
If your wiring/connections are all good, I would probably check for good grounds. Make sure anything that needs to be grounded is grounded on a spot that's clean, not corroded/painted. Hope this helps -Noah
|
![]() |
![]() |
![]() |
#3 |
Registered Smarta$$
Join Date: Mar 2004
Location: vancouver, wa
Posts: 214
|
i'm using chevy set up on my gmc. and the driver side has three wires and the other side has two would that make a difference? any info would help
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2003
Location: Arkansas
Posts: 34
|
I just bought a harness from LMC and its like what you
described. That third wire on mine is a pigtail park light wire for license plate light, has a small male plug on end of it. Shouldn't have anything to do with your problem. I'm thinkin like noah, bad ground. ![]()
__________________
64 Chevy pickup tilt,pb, ps discs up front 350/TH350, 72 rearend auto meter gauges 93 GMC extended cab trailmaster conversion |
![]() |
![]() |
![]() |
#5 |
Registered Smarta$$
Join Date: Mar 2004
Location: vancouver, wa
Posts: 214
|
i fix my problem all i did was take a little file and filed down the progs in the connector and that was it.
![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|