|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
06-22-2004, 08:12 PM
|
#1 |
|
Registered User
Join Date: Jun 2004
Posts: 3
|
Polyurethane Body Mounts
Does Anyone Know If A '73-'87 Polyurethane Body Mount Bushing Kit Will Work With A '65 Body? I Would Like To Use Them Between A '65 Body And A '86 Frame.
Thank You |
|
|
|
06-23-2004, 04:28 AM
|
#2 |
|
user # 2756
 
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
You'll probably have to move the mounts on the frame to match the mounting points on the cab, doing this and you can use the mounts. If you just sit the cab on and drill holes in the cab, probably not.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
|
|
|
|
|
06-23-2004, 11:50 AM
|
#3 |
|
Registered User
Join Date: Jun 2004
Posts: 3
|
Mounts
I Guess My Question Is, Are The Body Mount Bolts And The Mount Shapes/configurations Such That A '73-'87 Body Mount Bushing Set Will Fit A '60-'66 Cab. I Am Moving The Mount Brackets On The Frame To Match The Cab/body. I Am Looking For A Bushing Set That Will Work Nicely With Both The Body And The Frame. DAYSTAR has a kit for '63-'66. I will probably buy that and make/modify the frame brackets to fit the bushings.
Thanks Last edited by trailmaster; 06-23-2004 at 12:09 PM. |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
