Front Cab Mount Washers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stllookn · 06-23-2004, 10:26 AM

Who carries the front cab mount washers? Those biguns with the shoulder on them. Maybe the Energy Kit comes with them? Just found out that it does not have them! Still looking!

imdarren · 06-23-2004, 10:46 PM

TTT For ya!

stllookn · 06-23-2004, 11:00 PM

Thanks Darren...I think I might have some on my parts truck but I just can't imagine that somebody does not carry these. Most vendors do not know what the heck they are. When I first looked at them on the these trucks I thought it was part of the mount but that is because they are usually rusted in place...LOL!

crazy longhorn · 06-23-2004, 11:36 PM

I got some heavy cad plated flatwashers from a local surplus store(3/16 thick by 2 1/2"? ) . I would need to measure to be sure on size. at any rate, i used a couple washers on top of the front cab mounts, & cut some lenghts of pipe for a sleeve inside the bushings, to give a stop when torked up. the rears had new bolts, but the fronts did not(lucky she was a so cal truck). crazyL

**Phuloi68** · 06-23-2004, 11:37 PM

LMC has them

06-23-2004, 10:26 AM	#1
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Front Cab Mount Washers Who carries the front cab mount washers? Those biguns with the shoulder on them. Maybe the Energy Kit comes with them? Just found out that it does not have them! Still looking! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 06-23-2004 at 11:49 AM.

06-23-2004, 10:46 PM	#2
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	TTT For ya! __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super

06-23-2004, 11:00 PM	#3
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Thanks Darren...I think I might have some on my parts truck but I just can't imagine that somebody does not carry these. Most vendors do not know what the heck they are. When I first looked at them on the these trucks I thought it was part of the mount but that is because they are usually rusted in place...LOL! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

06-23-2004, 11:36 PM	#4
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	I got some heavy cad plated flatwashers from a local surplus store(3/16 thick by 2 1/2"? ) . I would need to measure to be sure on size. at any rate, i used a couple washers on top of the front cab mounts, & cut some lenghts of pipe for a sleeve inside the bushings, to give a stop when torked up. the rears had new bolts, but the fronts did not(lucky she was a so cal truck). crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

06-23-2004, 11:37 PM	#5
Phuloi68 Senior Member Join Date: Dec 2003 Location: Valparaiso, In Posts: 1,114	LMC has them __________________ Phuloi68 Indy survivor Norwood survivor Big Sandy survivor for those who fight for it... F R E E D O M has a price the protected will never know.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.