|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
07-20-2004, 05:08 PM
|
#1 |
|
Registered User
Join Date: Jul 2004
Posts: 4
|
In desperate need of 62 c-10 axle
If any-one can help it may be you people. I've looked high and low for a drivers side rear axle for my 62 c-10 pick-up. Many claim to have it but fail to come up with the correct dimensions I need. If anybody can help it would be appreciated.
|
|
|
|
07-22-2004, 12:11 AM
|
#2 |
|
Registered User
Join Date: Apr 2004
Location: arkieland
Posts: 1,070
|
Try Tom Myers truck parts, Miami, OK (918)-542-3871
|
|
|
|
|
08-12-2004, 01:37 PM
|
#3 |
|
Registered truck nut
Join Date: Dec 1999
Location: Mt. Vernon, Washington, USA
Posts: 1,584
|
What rearend is it. 12 bolt or Dana 44. Give the length and spline count also
__________________
MOUNT VERNON, WASH. STATE Need a part? Just PM me |
|
|
|
|
08-21-2004, 10:39 AM
|
#4 |
|
Registered User
Join Date: Jul 2004
Posts: 4
|
The rear-end is the Dana with the drop out third member. Spline count is 17. Length from inside surface to end of the button is 29 5/8 , or 29 9/16. the length is real close due to the axle being in two pieces. Also the button on the end is the thick button. There were 2 styles. One was about an eighth inch thick and the other around 5/16. Six lugs for the lug nuts also.
|
|
|
|
|
09-03-2004, 08:05 AM
|
#5 |
|
Registered User
Join Date: Dec 1999
Location: BRADENTON FLA
Posts: 3,269
|
Do you need the small or large button? also what zipcode for shipping?
__________________
Rest in Peace Ed. Thanks for all the good times. |
|
|
|
|
09-04-2004, 05:36 PM
|
#6 | |
|
Registered User
Join Date: Mar 2004
Location: Ohio
Posts: 156
|
Quote:
 Axle in 2 pieces? 60 - 62 should be the same (1/2 ton with removable gear carrier aka third member, pumkin) and my 61 axles are 1 piece. Never heard of a 2 piece axle. Also, are you referring to the button end as the end that accepts the c clips? Just curious...
|
|
|
|
|
|
09-29-2004, 07:09 PM
|
#7 |
|
Registered User
Join Date: Jul 2004
Posts: 4
|
To clear things up the axle broke into two pieces. And the button is the end that accepts the c-clips. And also I found a NOS axle at Tom Meyers. The truck is on the road and I drove it to my wedding last weekend. Of coarse I had to lay some rubber out of chuch. What other choice did I have, With everybody watching and all. Thanks 64 Fleetside for the advice.
|
|
|
|
|
09-30-2004, 08:13 AM
|
#8 |
|
Registered User
Join Date: Apr 2004
Location: arkieland
Posts: 1,070
|
Glad to hear you're back on the road. Brian
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
