Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
09-01-2004, 07:07 PM | #1 |
Registered User
Join Date: Jun 2004
Location: DFW Area Texas
Posts: 436
|
HELP!!! What price should I ask for these parts??
Uploaded some pics
Okay Fellas, This is not a what should i ask for these parts to sell them asap etc thread. I am seriously wondering what I should ask for the following before I post them if I do post them. I am looking at converting a 4X4 Blazer to 2X4 using Suburban parts. So I will have the following extra. Stock 10 Bolt fron axle complete with great disk brakes, Mile Marker hub etc $??? Stock 12 Bolt Complete as well with good brakes $??? Turbo 350 tranny rebuilt within the last year shift excellent no leaks etc for 4X4 $??? NP 208 Transfer case also rebuilt also shift very smooth with no problems $??? 327 from a 68 Camaro. Runs excellent, does not smoke and I have not even romped on it yet. The motor was completely gone through and I have the receipts somewhere if I can find them. Steel Crank Flat tops 9:5 to 1 or close to it) Mild RV style cam (Have specs on it at the house) Double Roller timing chain Brand New Harmonic Balancer Brand New Accel Distributor With Accel HEI Coil Brand New Edelbrock Performer Intake Brand New Holley 600 Carb Dress up kit (Chrome Valve covers, Timing Chain cover and Chrome 6 QT Oil pan) Header with true duel exhaust Runs excellent, starts excellent, no run on or anything negative about this motor. $??? Would I be better off parting the motor out as far as carb, intake, distributor go??? Pro-comp mud terrains 31s, they have less than 3000 miles on them, Excellent shape. $??? Decent set of 6 Lug rallys $??? That is about it right now, Still not sure if I am going to do this or not but awaiting word of some stuff and figured I coudl use yalls help on prices so I dont take it in the shorts or overprice the stuff. Thanks Stacey Last edited by Staceydude; 09-10-2004 at 07:11 PM. |
09-01-2004, 07:16 PM | #2 |
I'm back with 2nd truck!
Join Date: Feb 2002
Location: Texas
Posts: 3,774
|
Can't help you but when you get a price for the 12 bolt let me know. I need one to do a swap with mine and get the carrier and gears replaced. Also what gears are in it now?
__________________
1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson |
09-01-2004, 07:21 PM | #3 |
california fill
Join Date: Apr 2004
Location: Sunny So-Cal
Posts: 694
|
10 bolt front- $150-200
12 bolt rear- $150 th350- $250 or so np208- $175 327- dunno, Id say 700-800 or so if you can prove its all good & was done right those are just my guesses, on what I might ask and/or pay for those parts.. remember they're used and just cuz you say they're recently rebuilt or work great, used parts are used parts unless you can somehow prove it (very hard to do) good luck pc |
09-01-2004, 08:17 PM | #4 | |
Registered User
Join Date: Jun 2004
Location: DFW Area Texas
Posts: 436
|
Quote:
I may keep the motor for all I know. I would also let someone test the parts first or maybe have someone drive it and then I will have a witness on how all the parts are. Wondering what I might get for the 600 Holley, Edelbrock Performer, Accell Distributor and coil??? 79 Big 10, I will let you know or post up if I decide to go through with it. I am not sure of the gear ratio. Thanks Anymore input anyone? |
|
09-02-2004, 01:37 PM | #5 |
Registered User
Join Date: Jun 2004
Location: DFW Area Texas
Posts: 436
|
Anyone else have any feedback for me?
Thanks |
09-10-2004, 07:11 PM | #6 |
Registered User
Join Date: Jun 2004
Location: DFW Area Texas
Posts: 436
|
ttt
|
Bookmarks |
|
|