October Blazer of the Month - The 1947 - Present Chevrolet & GMC Truck Message Board Network

redz 1970 K5 · 10-05-2004, 11:51 AM

My time is up! Allright. For a little history-

In 2002, I had a NICE 86 Corvette... 2 events led me to get an old Blazer...

1- I really wanted one since I was a kid
2- I needed some more $$$ to close the deal on my home

So, I traded this Vette below for the Blazer in said topic and $$$ to close my house...

I found the Blazer in Provo, UT. It was a 'vocational school' project. In order for the students to pass the course, they had to remove ALL rust panels and repair with as little filler use as possible. When I got it, I was happy with it cosmetically, however mechanically it leaved much to be desired.

Within months I grew frustrated due to mechanical issues and having a hard time registering it in CA, and sold it. Thought that was it. I bought a 94 Z71 with some of the proceeds, thinking it was what I wanted instead-

Well, as it turns out, I regretted selling the Blazer and wished I never sold it. I was going to buy a Blazer that my uncle had for $1,500. I had the deal all setup, when low and behold, I am looking in the autotrader, and there is MY OLD BLAZER in all of it's glory! I called him, and within minutes, I made arrangements to get it the next day. He had made thousands in repairs, registered it, and sold it to me for $1,000 less then I sold it to him!!!

I sold the Z71 shortly thereafter and have been reunited with my Blazer. I am still frustrated since things do still come up, but that is the nature of these old trucks.

1971 K5
4" Springs front/rear
RS 5000's
33x12.50R15s on 15x10 AREs
12 Bolt Rear/D44 Front 3.73's
NP205
Rebuilt TH350
Rebuilt 350 - HEI, Edelbrock intake, Carter AFB, Electric Fan

Double wall top
Tailgate handle relocation- Chevy emblem skin installed on tailgate
Rear roll pan
Rhino Lining
Pioneer head unit, 6x9s under back seat, 6 1/2" in door panels

This thing is a blast to drive... My intentions are to pull the truck apart and revive it soon. Aside from gratuitous powder coating, I will be replacing all wiring, break/fuel lines, tank, body mounts, rear fenders, outer rocker panels and a few other panels that were not installed very well.

Good old Zumo did a photochop of what direction I think I will take with the style- I want to add a new modern look to the classic lines of an already classic truck. That is at the bottom.

Without further ado, a lot of pictures a lot of you have probably seen!

ZUMO chop-

Thanks again, this website is great, and you folks are great. Some of the forums are a little stuffy where a LOT is spoken but not a lot gets said. This forum has a great group of folks united by a passion not a lot of people share. Great community!!!

Swbman · 10-05-2004, 01:43 PM

Man,with all that wheeling and dealing,you come back full circle with a very nice looking rig.Glad to hear a happy story for a change....Congradulations..

71Blazer · 10-07-2004, 02:21 PM

Quite a story... and some other nice rides along the way- all Chevy's I might add

. As for the Tangerine(?) color I've always kind of liked it... Congratulations!

FRENCHBLUE72 · 10-07-2004, 09:17 PM

Very nice looking ride you have there the zumo rendering look's very modern and should bring the blaz up to date(something I need to also do)

redz 1970 K5 · 10-09-2004, 04:13 PM

Thanks for the comments guys.

As far as future plans, I see

6" suspension/2" body and 37's or 38's.
700R4
Late model seats front/back
HEAVY sound deadening and carpeting
Heater working!
New tops- Softop and hard top
Cowl hood

The truck will definitely be orange. Maybe just hugger orange, but I am going to explore more modern metallics as well.

10-05-2004, 11:51 AM	#1
redz 1970 K5 OBS guy Join Date: Jun 2004 Location: SoCal Posts: 1,060	October Blazer of the Month My time is up! Allright. For a little history- In 2002, I had a NICE 86 Corvette... 2 events led me to get an old Blazer... 1- I really wanted one since I was a kid 2- I needed some more $$$ to close the deal on my home So, I traded this Vette below for the Blazer in said topic and $$$ to close my house... I found the Blazer in Provo, UT. It was a 'vocational school' project. In order for the students to pass the course, they had to remove ALL rust panels and repair with as little filler use as possible. When I got it, I was happy with it cosmetically, however mechanically it leaved much to be desired. Within months I grew frustrated due to mechanical issues and having a hard time registering it in CA, and sold it. Thought that was it. I bought a 94 Z71 with some of the proceeds, thinking it was what I wanted instead- Well, as it turns out, I regretted selling the Blazer and wished I never sold it. I was going to buy a Blazer that my uncle had for $1,500. I had the deal all setup, when low and behold, I am looking in the autotrader, and there is MY OLD BLAZER in all of it's glory! I called him, and within minutes, I made arrangements to get it the next day. He had made thousands in repairs, registered it, and sold it to me for $1,000 less then I sold it to him!!! I sold the Z71 shortly thereafter and have been reunited with my Blazer. I am still frustrated since things do still come up, but that is the nature of these old trucks. 1971 K5 4" Springs front/rear RS 5000's 33x12.50R15s on 15x10 AREs 12 Bolt Rear/D44 Front 3.73's NP205 Rebuilt TH350 Rebuilt 350 - HEI, Edelbrock intake, Carter AFB, Electric Fan Double wall top Tailgate handle relocation- Chevy emblem skin installed on tailgate Rear roll pan Rhino Lining Pioneer head unit, 6x9s under back seat, 6 1/2" in door panels This thing is a blast to drive... My intentions are to pull the truck apart and revive it soon. Aside from gratuitous powder coating, I will be replacing all wiring, break/fuel lines, tank, body mounts, rear fenders, outer rocker panels and a few other panels that were not installed very well. Good old Zumo did a photochop of what direction I think I will take with the style- I want to add a new modern look to the classic lines of an already classic truck. That is at the bottom. Without further ado, a lot of pictures a lot of you have probably seen! ZUMO chop- Thanks again, this website is great, and you folks are great. Some of the forums are a little stuffy where a LOT is spoken but not a lot gets said. This forum has a great group of folks united by a passion not a lot of people share. Great community!!! __________________ 88 Suburban Goodies- Alpine, Auto Meter, BDS, Bilstein, B&M, BFG, Borgeson, Bushwhacker, Cowl hood, Flowmaster, Genuine Gear, Holley, Infinity, JVC, K&N, MB Wheels, MSD, Pioneer, Skyjacker, Sony, Thorley, Walker + more Last edited by redz 1970 K5; 10-12-2004 at 11:59 AM.

10-05-2004, 01:43 PM	#2
Swbman Senior Member Join Date: Mar 2004 Location: Tulsa,Oklahoma Posts: 606	Man,with all that wheeling and dealing,you come back full circle with a very nice looking rig.Glad to hear a happy story for a change....Congradulations.. __________________ 1961 BUICK LESABRE 1968 CHEVELLE SS 396 1969 BUICK RIVIERA GS 1971 2 WHEEL DRIVE BLAZER 1971 4X4 BLAZER 1971 SHORTBED CHEYENNE FLEETSIDE 1971 SHORTBED 4X4 FLEETSIDE ** ...My Ebay

10-07-2004, 02:21 PM	#3
71Blazer Goodbye Darlin' Join Date: Nov 2001 Location: Coupeville, WA USA Posts: 330	Quite a story... and some other nice rides along the way- all Chevy's I might add . As for the Tangerine(?) color I've always kind of liked it... Congratulations! __________________ 1971 Blazer CST SOLD!

10-07-2004, 09:17 PM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Very nice looking ride you have there the zumo rendering look's very modern and should bring the blaz up to date(something I need to also do) __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-09-2004, 04:13 PM	#5
redz 1970 K5 OBS guy Join Date: Jun 2004 Location: SoCal Posts: 1,060	Thanks for the comments guys. As far as future plans, I see 6" suspension/2" body and 37's or 38's. 700R4 Late model seats front/back HEAVY sound deadening and carpeting Heater working! New tops- Softop and hard top Cowl hood The truck will definitely be orange. Maybe just hugger orange, but I am going to explore more modern metallics as well. __________________ 88 Suburban Goodies- Alpine, Auto Meter, BDS, Bilstein, B&M, BFG, Borgeson, Bushwhacker, Cowl hood, Flowmaster, Genuine Gear, Holley, Infinity, JVC, K&N, MB Wheels, MSD, Pioneer, Skyjacker, Sony, Thorley, Walker + more



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.