electric choke question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76bonanza · 10-18-2004, 05:06 PM

I took my choke off my holly over the summer to install the quick change springs. Now that it is getting cold I need to adjust it some it appears to not stay on long enuf. When I start it up it is good it just disengages to soon and runs rough for a while. Im I remembering right do I turn it to the right to make it stay choked longer?

Thanks for any help.

loweredd · 10-18-2004, 08:07 PM

I would say get it warm, then adjust it so it shuts. You will probably turn it clockwise, toward the front of the truck.

10-18-2004, 05:06 PM	#1
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	electric choke question I took my choke off my holly over the summer to install the quick change springs. Now that it is getting cold I need to adjust it some it appears to not stay on long enuf. When I start it up it is good it just disengages to soon and runs rough for a while. Im I remembering right do I turn it to the right to make it stay choked longer? Thanks for any help. __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

10-18-2004, 08:07 PM	#2
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	I would say get it warm, then adjust it so it shuts. You will probably turn it clockwise, toward the front of the truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.