changing th350 speedo gears - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 11-21-2004, 03:51 AM

i need to change the gears in my tranny for my speedo to read right when i get my new gears. i've read both of the pages on 73-87.com

http://www.73-87.com/7387garage/drivetrain/speedo.htm
http://www.73-87.com/7387garage/drivetrain/spdgears.htm

but i'm not exactly positive if the part #'s are the same for the 700r4 and the th350 or if the install is the same.

MylilBowTie · 11-21-2004, 03:54 AM

http://tciauto.com/components/speedometer_gears.htm

ocbaud · 11-21-2004, 04:28 PM

is it the same procedure as changing them out on a 700r4?

also, where would be a good place to order them at?

tci doesnt carry the drive gear i need.

here is what i figured on there website that i would need:

8 tooth drive gear(orange)
22 tooth driven gear(gray)

SanitysBane · 11-21-2004, 08:22 PM

try your local GM parts house, thats were i got mine

loblazer · 11-23-2004, 02:02 PM

I got mine at GM dealer also. If not, try your local transmission shop.

**Captkaos** · 11-23-2004, 02:05 PM

Try GM Eric. They should have them.

11-21-2004, 03:51 AM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	changing th350 speedo gears i need to change the gears in my tranny for my speedo to read right when i get my new gears. i've read both of the pages on 73-87.com http://www.73-87.com/7387garage/drivetrain/speedo.htm http://www.73-87.com/7387garage/drivetrain/spdgears.htm but i'm not exactly positive if the part #'s are the same for the 700r4 and the th350 or if the install is the same.

11-21-2004, 03:54 AM	#2
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	http://tciauto.com/components/speedometer_gears.htm __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

11-21-2004, 04:28 PM	#3
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	is it the same procedure as changing them out on a 700r4? also, where would be a good place to order them at? tci doesnt carry the drive gear i need. here is what i figured on there website that i would need: 8 tooth drive gear(orange) 22 tooth driven gear(gray) Last edited by ocbaud; 11-21-2004 at 04:40 PM.

11-21-2004, 08:22 PM	#4
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	try your local GM parts house, thats were i got mine __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer

11-23-2004, 02:05 PM	#6
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Try GM Eric. They should have them. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

11-23-2004, 02:02 PM	#5
loblazer Senior Member Join Date: Mar 2004 Location: Fergus, Ontario Posts: 481	I got mine at GM dealer also. If not, try your local transmission shop.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.