anyone know anything about a willys engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bigunde** · 12-11-2004, 12:58 PM

dont know if you guy have some willys fans,but just found a complete super hurricane 6 engine and drivetrain.are they worth anything?

BobS · 12-11-2004, 02:38 PM

The Super Hurricane is a pretty common engine in Willys Wagons and Pickups. It was the standard engine in those applications for quite a few years. The transmission (Borg-Warner T-90 3-speed) and transfer case (Spicer 18) are very common, they were used in almost everything Willys made then. Probably worth a couple hundred bucks to the right guy depending on the condition they're in.

Bob

neonlarry · 12-11-2004, 05:41 PM

If the engine you are refering to is the 226 cid flathead 6, they are pretty hard to find. They probably arent worth a huge amount of money, but for sure there are people that want them. One of my friends and a 62 willys pickup with one of those engines, and he has enough parts to build about 5 more engines. lol The part thats the hardest to find is a non cracked exahust manifold, that alone is worth a big of money. (or a 2bbl intake, they were only used on kaisers for like 2 years)

12-11-2004, 12:58 PM	#1
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	anyone know anything about a willys engine dont know if you guy have some willys fans,but just found a complete super hurricane 6 engine and drivetrain.are they worth anything?

12-11-2004, 02:38 PM	#2
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	The Super Hurricane is a pretty common engine in Willys Wagons and Pickups. It was the standard engine in those applications for quite a few years. The transmission (Borg-Warner T-90 3-speed) and transfer case (Spicer 18) are very common, they were used in almost everything Willys made then. Probably worth a couple hundred bucks to the right guy depending on the condition they're in. Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

12-11-2004, 05:41 PM	#3
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	If the engine you are refering to is the 226 cid flathead 6, they are pretty hard to find. They probably arent worth a huge amount of money, but for sure there are people that want them. One of my friends and a 62 willys pickup with one of those engines, and he has enough parts to build about 5 more engines. lol The part thats the hardest to find is a non cracked exahust manifold, that alone is worth a big of money. (or a 2bbl intake, they were only used on kaisers for like 2 years) __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.