Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
12-30-2001, 06:13 PM | #1 |
Registered User
Join Date: Dec 2001
Location: long island new york
Posts: 3
|
STEERING BOX MASTER CYLINDER
Can I take the steering box from a 1987 camaro and master cylinder from a 87 camaro and stick it in my 1970 gmc pickup?
__________________
MOnteCarlo |
12-30-2001, 07:18 PM | #2 |
Registered User
Join Date: Aug 2001
Location: Long Beach, Ca
Posts: 1,432
|
No
------------------ 71 basic C-10 350. The only option is the rust.No nothing on it, but thats all about to change. <A HREF="http://www.geocities.com/stevemau/slam33page.html?1004806705410 " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>
__________________
71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A> |
12-30-2001, 07:21 PM | #3 |
Registered User
Join Date: Aug 2001
Location: Long Beach, Ca
Posts: 1,432
|
The mount for the box is all wrong and the pitman arm shaft is too small. The brake master is too small bore size and it's for a disc/drum combo and you have drum/drum
------------------ 71 basic C-10 350. The only option is the rust.No nothing on it, but thats all about to change. <A HREF="http://www.geocities.com/stevemau/slam33page.html?1004806705410 " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>
__________________
71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A> |
12-30-2001, 10:19 PM | #4 |
Registered User
Join Date: Dec 2001
Location: long island new york
Posts: 3
|
what cars can i take the power steering and master cylinder out to make my manual steering 1970 gmc pickup to power steering?
__________________
MOnteCarlo |
12-30-2001, 10:32 PM | #5 |
Strongman Garage
Join Date: Apr 2000
Location: Salinas, CA
Posts: 10,241
|
cars? no cars.. but can take use the box off of any 68-80 chevy pickup 10-30 series
------------------ My Truck pictures www.xframeimpala.com 68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET" 56 big window short stepside 235 dual 1 brls 64ImpalaSS 327 70 C10 LWB fleetside custom/10 350/TH350 IM me on aol SN= SHAGROLET
__________________
Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE |
12-31-2001, 01:01 AM | #6 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
the reason why car boxes wont work is because if you look under the car and look under the turck, the cars boxes are mounted inside the frame rails and are totally different casting, and the truck boxes mount outside of the frame rail. VERY few parts in some rare cases will work on trucks,only some engine/tranny items and mostly small electrical items.
No suspension/steering or axle/frame items will swap. Cars are cars and trucks are trucks, nothing alike. good luck., p/s pump and brackets and pullies can get complicated in short order, it all depends on if the engine you have is setup with the original driver side mounted alternator and short water pump and ram horn manifolds(V8 engines) ------------------ A 68 C-10 panel and a 68 dually C-30 dump truck and a couple 71/72 chassis projects. http://messenger.msn.com [This message has been edited by Fast68Chevy (edited 12-31-2001).] |
Bookmarks |
|
|