Need some pictures of clutch linkage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c10-377 · 02-15-2005, 05:07 PM

I have a 1968 c10 with a 250, and a 3speed on the floor. I need a picture of how the linkage looks like from teh side of the block down to the clutch fork. These parts are missing are this truck and i guess im gonna have to make something that will work but i need some pictures of what all this looks like so i can make it. Anything help would be greatly appreciated.

stickshift_or_walk · 02-15-2005, 05:37 PM

Here's a pic from a stock '70 C10, 6cyl/3spd.

It doesn't show all the way to the block, but the bracket on the left side of the Z-bar is just a u-shape that bolts to the block with two bolts - you should see the tapped holes.

BTW, a bunch of guys here have swapped that gear you need out for other setups, so I'd suggest you post a WTB on the parts board. You might find one close & cheap!

SSOW

c10-377 · 02-15-2005, 10:27 PM

thanks for the info

68w/sbc406 · 02-16-2005, 12:07 AM

if i still had mine you would just have to pay for the flight, but i scrapped them with the block and tranny too

02-15-2005, 05:07 PM	#1
c10-377 Registered User Join Date: Nov 2004 Location: Western Ky Posts: 56	Need some pictures of clutch linkage I have a 1968 c10 with a 250, and a 3speed on the floor. I need a picture of how the linkage looks like from teh side of the block down to the clutch fork. These parts are missing are this truck and i guess im gonna have to make something that will work but i need some pictures of what all this looks like so i can make it. Anything help would be greatly appreciated. __________________ 1969 c10 2wd 377 destroked 500hp - In Planning stages of a 700hp 8-71 blown 406 sb 1990 ranger 2.3L 250k and counting I want my truck to have enough power that im afraid to put it to the floor

02-15-2005, 05:37 PM	#2
stickshift_or_walk Left Foot Functioning Join Date: May 2004 Location: Duncan, OK Posts: 351	Here's a pic from a stock '70 C10, 6cyl/3spd. It doesn't show all the way to the block, but the bracket on the left side of the Z-bar is just a u-shape that bolts to the block with two bolts - you should see the tapped holes. BTW, a bunch of guys here have swapped that gear you need out for other setups, so I'd suggest you post a WTB on the parts board. You might find one close & cheap! SSOW __________________ 69 C10 (#1 son's ride) 72 C20 (Dad's farm truck) 82 K30 (Ex - brush pumper project)

02-15-2005, 10:27 PM	#3
c10-377 Registered User Join Date: Nov 2004 Location: Western Ky Posts: 56	thanks for the info __________________ 1969 c10 2wd 377 destroked 500hp - In Planning stages of a 700hp 8-71 blown 406 sb 1990 ranger 2.3L 250k and counting I want my truck to have enough power that im afraid to put it to the floor

02-16-2005, 12:07 AM	#4
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	if i still had mine you would just have to pay for the flight, but i scrapped them with the block and tranny too __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.