How much longer than stock are these shacles (front leaf)? - Pic - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevy Muscle · 02-17-2005, 03:09 PM

below is a picture.

I'm trying to figure out how much these shacles are adding to the lift of the front end. If you have stock shacles still, please measure them and let me know how long (either holes on-center or end to end)

Big J · 02-17-2005, 03:20 PM

Just guessing but they look to be a couple inches longer than my stock ones. If you lift the rear of the spring like that won't it affect your driveshaft angle and your steering? Looks like a good cheap way to gain a bit of lift. I won't be around my blazer till Saturday. If no one has measured for ya by then, I'll measure mine and post it for ya. Good luck!!

Chevy Muscle · 02-17-2005, 04:21 PM

Quote:

Originally Posted by Big J

Just guessing but they look to be a couple inches longer than my stock ones. If you lift the rear of the spring like that won't it affect your driveshaft angle and your steering? Looks like a good cheap way to gain a bit of lift. I won't be around my blazer till Saturday. If no one has measured for ya by then, I'll measure mine and post it for ya. Good luck!!

Yeah, that is what I was thinking too. This was done by one of the POs..... you should see the missmatch springs that were on it before I changed'em out.

Ok, I'll post a picture.... just toooo funny. The ones on the left were what I took off.

bouncytruck · 02-17-2005, 05:09 PM

I'm not positive, but I think the stock shackels go up, not down. I'm at work now, but if I get a chance to run out to the parking lot, I can take a look at my Blazer and see.

BobbyK · 02-17-2005, 07:02 PM

Here's a crappy pic of my stock shackles.
There about 5".5" long,end to end.

Chevy Muscle · 02-17-2005, 07:07 PM

Ok, that means mine are about 1" longer than stock.

Thanks

bouncytruck · 02-17-2005, 08:40 PM

I guess I was wrong. Maybe I'm thinking about the rear shackels?

aztxk5 · 02-17-2005, 10:40 PM

Stock shackles are 4" center to center. Most folks won't run over 1" extended because it throws your driveline out the wrong direction. That's my.02 cents worth.
Al

Lucasj03 · 02-17-2005, 10:56 PM

4" c to c is correct for stock shackles. I have 6 1/2" shackles on mine with a 2 degree shim on the bottom of the leaf pack. The shackle gives a 1 1/4 of lift from stock. The lift is only half of the difference because your only lifting one side of the spring.

02-17-2005, 03:09 PM	#1
Chevy Muscle < 69 Blazer Join Date: Mar 2004 Location: Nevada, TX Posts: 292	How much longer than stock are these shacles (front leaf)? - Pic below is a picture. I'm trying to figure out how much these shacles are adding to the lift of the front end. If you have stock shacles still, please measure them and let me know how long (either holes on-center or end to end) Attached Images

02-17-2005, 03:20 PM	#2
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Just guessing but they look to be a couple inches longer than my stock ones. If you lift the rear of the spring like that won't it affect your driveshaft angle and your steering? Looks like a good cheap way to gain a bit of lift. I won't be around my blazer till Saturday. If no one has measured for ya by then, I'll measure mine and post it for ya. Good luck!! __________________ BAZINGA! My Build

02-17-2005, 05:09 PM	#4
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	I'm not positive, but I think the stock shackels go up, not down. I'm at work now, but if I get a chance to run out to the parking lot, I can take a look at my Blazer and see. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

02-17-2005, 07:02 PM	#5
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	Here's a crappy pic of my stock shackles. There about 5".5" long,end to end. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE Last edited by BobbyK; 02-17-2005 at 11:22 PM.

02-17-2005, 08:40 PM	#7
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	I guess I was wrong. Maybe I'm thinking about the rear shackels? __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

02-17-2005, 07:07 PM	#6
Chevy Muscle < 69 Blazer Join Date: Mar 2004 Location: Nevada, TX Posts: 292	Ok, that means mine are about 1" longer than stock. Thanks

02-17-2005, 10:40 PM	#8
aztxk5 Registered User Join Date: Jan 2005 Location: Azle, Texas USA Posts: 48	Stock shackles are 4" center to center. Most folks won't run over 1" extended because it throws your driveline out the wrong direction. That's my.02 cents worth. Al

02-17-2005, 10:56 PM	#9
Lucasj03 Registered User Join Date: Feb 2005 Location: Ft. Collins, CO Posts: 30	4" c to c is correct for stock shackles. I have 6 1/2" shackles on mine with a 2 degree shim on the bottom of the leaf pack. The shackle gives a 1 1/4 of lift from stock. The lift is only half of the difference because your only lifting one side of the spring.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.