factory stainless steel headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frank_Zeller · 02-26-2005, 10:19 PM

I listed these on the 73-87 parts board they might work on 88 to 98's?

These are factory 1986 stainless steel headers/manifolds used on ¾ ton 350 4-speed trucks. These trucks did not have the catalytic converters and had factory duals. They accept a 2.5-inch head pipe and have the thick flange with tube stand off that will allow the use of the factory brackets used with the cast iron manifolds. I spent a lot of time fixing these up to use on my 1969 but they hit the dam frame mount that the motor mount attaches to. These are similar to the GM headers used on the 85 and up Corvettes. Perfect for lowered trucks. See pics for details $75.00

[IMG]

phantom dually · 02-27-2005, 12:31 AM

Cant say Ive ever seen a set. Sounds rare!!

**crossy** · 02-28-2005, 10:05 PM

he's 100% right :-) , I have two pair here that I welded up the holes in also. I also don't know if they fit 88-up though. DAVE

Frank_Zeller · 03-01-2005, 11:00 AM

sale pending

02-26-2005, 10:19 PM	#1
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	factory stainless steel headers I listed these on the 73-87 parts board they might work on 88 to 98's? These are factory 1986 stainless steel headers/manifolds used on ¾ ton 350 4-speed trucks. These trucks did not have the catalytic converters and had factory duals. They accept a 2.5-inch head pipe and have the thick flange with tube stand off that will allow the use of the factory brackets used with the cast iron manifolds. I spent a lot of time fixing these up to use on my 1969 but they hit the dam frame mount that the motor mount attaches to. These are similar to the GM headers used on the 85 and up Corvettes. Perfect for lowered trucks. See pics for details $75.00 [IMG] __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas Last edited by Frank_Zeller; 02-27-2005 at 12:21 PM.

02-27-2005, 12:31 AM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Cant say Ive ever seen a set. Sounds rare!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-28-2005, 10:05 PM	#3
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	he's 100% right :-) , I have two pair here that I welded up the holes in also. I also don't know if they fit 88-up though. DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. Last edited by crossy; 02-28-2005 at 10:11 PM.

03-01-2005, 11:00 AM	#4
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	sale pending __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.