BFG tires and Weld Draglites in DFW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jonboy · 02-26-2005, 11:45 PM

I have decided to go ahead and sell the wheels and tires on my Blazer. I am wanting a set of TTII's, but it will probably have to wait until after paint. These are a set of Weld Draglites, wrapped in new BFG tires. The tires are 235/70 in the front and 255/70 on the rear. I don't think teh tires even have 50 miles on them. I also bought the road hazard warranty from Discount tire, so that goes with them. Looking for $350 for all of it, which is less that what I have in the tires. I have caps and lugs too, but the caps are not original (one of them says Cragar) but they are weld wheels, in decent shape. There are a few pics of my Blazer floating around here with them on it. I would prefer not to ship these as well.

454_72_4X4 · 02-27-2005, 12:12 AM

Could ya send me some pics of them? tbaker@nemr.net Or maybe point me to pics here on the board!
Thanks.
BTW, what sizes are the wheels?

f.monroe · 02-27-2005, 12:51 AM

I am second in line behind 454_72_4x4 I think .I would like to see pics also .Send them to frankm@tconline.net .

Jonboy · 02-27-2005, 11:31 AM

I found the post where I thought that I wanted to sell my Blazer

, and the wheels were on it there. My blazer is dropped about 4/6 from what I can tell, to give an idea on the size of the wheels. Pretty sure they are 15x7 in teh front and 15x8 in the rear.

454_72_4X4 · 02-27-2005, 12:11 PM

Well, don't be selfish....where's the link!LOL

Ya can jump on up to the front of the line j.monroe. I'm lookin for 8's and 10's!

454_72_4X4 · 02-27-2005, 12:25 PM

Found it!
http://67-72chevytrucks.com/vboard/s....php3?t=125859
Damn maybe I spoke to soon! Those look nice!

Nah...

I gotta hold out for 10's/8's, go ahead j.monroe.

ItsNotABlazer · 02-28-2005, 11:20 AM

Jon I am pretty sure I will take the wheels but it will be a few weeks or so before I can come back down.....not sure how big of a hurry you are in. I was in Euless saturday talking to Izzy about finishing my air ride setup and unless something happens I will be back down there again around the weekend of the 14th. Do the wheels have and damage at all? Also if you still have the doors for the full convertible I could pick those up also.

Brad

Jonboy · 02-28-2005, 11:28 AM

Brad, the wheels are in pretty decent shape, but could stand a polishing. I (still) have the doors on the truck, but you are more than welcome to those as well. If you want the wheels, I will hold them for you. I am about 15 minutes from Euless, at 20 & 360. Just let me know when you are coming.

ItsNotABlazer · 02-28-2005, 11:36 AM

Cool, what we are aiming for right now is me taking the truck down on Friday the 11th and going back down if he is done with it on Sunday to pick it up. I could just come by that Friday or Sunday but Sunday would probably be best cause I doubt the g/f would like me hauling wheels and tires in the back of her Santa Fe...if they would even fit lol.

I think I still have your number around here somewhere and I will either call or pm you when I find out a definite date. If it looks like it will be any later than the 11th-13th I can just make a trip down some weekend.

Brad

Jonboy · 02-28-2005, 11:43 AM

works for me, Brad. I think I have your number somewhere as well. They are still on the truck, so that gives me plenty of time......

02-26-2005, 11:45 PM	#1
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	BFG tires and Weld Draglites in DFW I have decided to go ahead and sell the wheels and tires on my Blazer. I am wanting a set of TTII's, but it will probably have to wait until after paint. These are a set of Weld Draglites, wrapped in new BFG tires. The tires are 235/70 in the front and 255/70 on the rear. I don't think teh tires even have 50 miles on them. I also bought the road hazard warranty from Discount tire, so that goes with them. Looking for $350 for all of it, which is less that what I have in the tires. I have caps and lugs too, but the caps are not original (one of them says Cragar) but they are weld wheels, in decent shape. There are a few pics of my Blazer floating around here with them on it. I would prefer not to ship these as well. __________________ 1974 Jimmy- 5.3/4L80e/NP241

02-27-2005, 12:12 AM	#2
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Could ya send me some pics of them? tbaker@nemr.net Or maybe point me to pics here on the board! Thanks. BTW, what sizes are the wheels? __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-27-2005, 11:31 AM	#4
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	I found the post where I thought that I wanted to sell my Blazer , and the wheels were on it there. My blazer is dropped about 4/6 from what I can tell, to give an idea on the size of the wheels. Pretty sure they are 15x7 in teh front and 15x8 in the rear. __________________ 1974 Jimmy- 5.3/4L80e/NP241

02-27-2005, 12:11 PM	#5
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Well, don't be selfish....where's the link!LOL Ya can jump on up to the front of the line j.monroe. I'm lookin for 8's and 10's! __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-27-2005, 12:25 PM	#6
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Found it! http://67-72chevytrucks.com/vboard/s....php3?t=125859 Damn maybe I spoke to soon! Those look nice! Nah... I gotta hold out for 10's/8's, go ahead j.monroe. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-27-2005, 12:51 AM	#3
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	I am second in line behind 454_72_4x4 I think .I would like to see pics also .Send them to frankm@tconline.net .

02-28-2005, 11:20 AM	#7
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	Jon I am pretty sure I will take the wheels but it will be a few weeks or so before I can come back down.....not sure how big of a hurry you are in. I was in Euless saturday talking to Izzy about finishing my air ride setup and unless something happens I will be back down there again around the weekend of the 14th. Do the wheels have and damage at all? Also if you still have the doors for the full convertible I could pick those up also. Brad __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

02-28-2005, 11:28 AM	#8
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Brad, the wheels are in pretty decent shape, but could stand a polishing. I (still) have the doors on the truck, but you are more than welcome to those as well. If you want the wheels, I will hold them for you. I am about 15 minutes from Euless, at 20 & 360. Just let me know when you are coming. __________________ 1974 Jimmy- 5.3/4L80e/NP241

02-28-2005, 11:36 AM	#9
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	Cool, what we are aiming for right now is me taking the truck down on Friday the 11th and going back down if he is done with it on Sunday to pick it up. I could just come by that Friday or Sunday but Sunday would probably be best cause I doubt the g/f would like me hauling wheels and tires in the back of her Santa Fe...if they would even fit lol. I think I still have your number around here somewhere and I will either call or pm you when I find out a definite date. If it looks like it will be any later than the 11th-13th I can just make a trip down some weekend. Brad __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

02-28-2005, 11:43 AM	#10
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	works for me, Brad. I think I have your number somewhere as well. They are still on the truck, so that gives me plenty of time...... __________________ 1974 Jimmy- 5.3/4L80e/NP241



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.