looking for 71-72 cowl hood - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**hilljob26** · 03-08-2005, 10:07 PM

anyone have a 71-72 cowl hood laying around there not going to use,i am looking for one,let me know and how much,pics would be nice as well

RicksTrucks · 03-08-2005, 10:09 PM

I have a couple. What is the difference between those years and the earlier ones?

Tx Firefighter · 03-08-2005, 10:24 PM

It's 69-72 fitment.

RicksTrucks · 03-08-2005, 10:28 PM

? what is the difference?

longnlow72 · 03-08-2005, 10:32 PM

the 67-68 the end of the hood is more sloped and only fits 67-68 fenders/grille/etc the 69-72 arent as sloped and fit just 69-72

Tx Firefighter · 03-08-2005, 10:32 PM

67 and 68 hoods are longer in the front and lay at a flatter angle in the front.

The 69-72 hoods are more vertical and blunter on the front as they stop behind the grille rather than extending over the front edge of the grille like the 67-68 ones do.

RicksTrucks · 03-08-2005, 10:35 PM

I know the difference in the hoods, but he is asking for a cowl. So what is the difference in the cowls?

70rs/ss · 03-08-2005, 10:38 PM

There is no difference in the cowls, the hoods themselves are different. A 67 cowl hood will not fit a 69-72 because the hood itself is different. If you just have the cowl that needs welding or puttying to a hood, then there is no difference.

Tx Firefighter · 03-08-2005, 10:35 PM

It's got a raised "cowl induction" section in the middle. Strictly aftermarket.

longnlow72 · 03-08-2005, 10:38 PM

heres my cowl induction for an example

Tx Firefighter · 03-08-2005, 10:40 PM

See the raised section in the center of longnlow's hood, a' la GM Muscle car?

Never available on our trucks. In the past, folks have made them from pieces or molded on a scoop, but recently, aftermarket companies are producing them ready to go right out of the box.

RicksTrucks · 03-08-2005, 10:41 PM

My mistake. Gotta check my glasses. I only read as far as "cowl", thinking he was taling about the one over the wipers, and didn't realize he wanted a "cowl hood" - meaning aftermarket hood. Oh well, kept me awake tonite.

longnlow72 · 03-08-2005, 10:45 PM

i was suprised in his first response when he said i have a few layin around lol

**hilljob26** · 03-09-2005, 09:32 PM

yeah,i just thought it would be nice if someone had one laying around,but i guess i will keep dreaming,so i take it no ones got one...mike

03-08-2005, 10:07 PM	#1
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	looking for 71-72 cowl hood anyone have a 71-72 cowl hood laying around there not going to use,i am looking for one,let me know and how much,pics would be nice as well __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

03-08-2005, 10:09 PM	#2
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	I have a couple. What is the difference between those years and the earlier ones? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

03-08-2005, 10:24 PM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	It's 69-72 fitment. __________________ I'm on the Instagram- @Gearhead_Kevin

03-08-2005, 10:28 PM	#4
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	? what is the difference? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

03-08-2005, 10:32 PM	#5
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	the 67-68 the end of the hood is more sloped and only fits 67-68 fenders/grille/etc the 69-72 arent as sloped and fit just 69-72 Attached Images __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done... Last edited by longnlow72; 03-08-2005 at 10:34 PM.

03-08-2005, 10:35 PM	#7
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	I know the difference in the hoods, but he is asking for a cowl. So what is the difference in the cowls? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

03-08-2005, 10:38 PM	#8
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	There is no difference in the cowls, the hoods themselves are different. A 67 cowl hood will not fit a 69-72 because the hood itself is different. If you just have the cowl that needs welding or puttying to a hood, then there is no difference.

03-08-2005, 10:38 PM	#10
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	heres my cowl induction for an example Attached Images __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

03-08-2005, 10:40 PM	#11
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	See the raised section in the center of longnlow's hood, a' la GM Muscle car? Never available on our trucks. In the past, folks have made them from pieces or molded on a scoop, but recently, aftermarket companies are producing them ready to go right out of the box. __________________ I'm on the Instagram- @Gearhead_Kevin

03-08-2005, 10:41 PM	#12
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	My mistake. Gotta check my glasses. I only read as far as "cowl", thinking he was taling about the one over the wipers, and didn't realize he wanted a "cowl hood" - meaning aftermarket hood. Oh well, kept me awake tonite. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

03-08-2005, 10:45 PM	#13
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	i was suprised in his first response when he said i have a few layin around lol __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

03-09-2005, 09:32 PM	#14
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	yeah,i just thought it would be nice if someone had one laying around,but i guess i will keep dreaming,so i take it no ones got one...mike __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.