i need a speedo cable 67 k10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

matt_field · 03-14-2005, 07:56 PM

ive went everywhere and cant find one. its 73'' long. 1/2 ton 4wd.... id like a brand new one but where can i get one? i just see 63'' and 83'' hope somone can help

**hilljob26** · 03-14-2005, 08:19 PM

i think that 83 is as close as your going to get,i know manes truck parts has one that is 83 for 25 bucks,i hope this helps

**jamie72** · 03-14-2005, 08:42 PM

will one out of a blazer work?? i got one from a 72 here.

matt_field · 03-14-2005, 09:00 PM

it should, whats it measure for length? also did it work good?

jetfixr · 03-14-2005, 10:19 PM

I had to have one made when I swapped out my manual tranny for OD auto. I used these guys, http://www.gaugeguys.com/cables.htm. Tell them your measurements, and they will make a cable of any size up for you. Think I paid $45, but is a new cable and quite a bit more flexible then stock, for easier routing.

03-14-2005, 07:56 PM	#1
matt_field Registered User Join Date: Apr 2001 Location: Detroit Lakes, Minnesota Posts: 885	i need a speedo cable 67 k10 ive went everywhere and cant find one. its 73'' long. 1/2 ton 4wd.... id like a brand new one but where can i get one? i just see 63'' and 83'' hope somone can help __________________ 1971 k5 blazer 80k mike survivor 1972 3/4 ton 4wd Cummins 12v 1967 swb 2wd 427bbc 1968 4wd shortbox 1971 Cheyenne swb k10 unrestored 1971 Cheyenne super 40k 402bb survivor 1967 Chevy k10 (first truck) 1968 L78 camaro survivor 18k miles 1969 z28 survivor 60k miles 1969 z28 survivor 39k miles 1969 z28 rs survivor 80k miles

03-14-2005, 08:19 PM	#2
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	i think that 83 is as close as your going to get,i know manes truck parts has one that is 83 for 25 bucks,i hope this helps __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

03-14-2005, 08:42 PM	#3
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	will one out of a blazer work?? i got one from a 72 here. __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

03-14-2005, 09:00 PM	#4
matt_field Registered User Join Date: Apr 2001 Location: Detroit Lakes, Minnesota Posts: 885	it should, whats it measure for length? also did it work good? __________________ 1971 k5 blazer 80k mike survivor 1972 3/4 ton 4wd Cummins 12v 1967 swb 2wd 427bbc 1968 4wd shortbox 1971 Cheyenne swb k10 unrestored 1971 Cheyenne super 40k 402bb survivor 1967 Chevy k10 (first truck) 1968 L78 camaro survivor 18k miles 1969 z28 survivor 60k miles 1969 z28 survivor 39k miles 1969 z28 rs survivor 80k miles

03-14-2005, 10:19 PM	#5
jetfixr Registered User Join Date: Jan 2005 Location: Central CA Posts: 86	I had to have one made when I swapped out my manual tranny for OD auto. I used these guys, http://www.gaugeguys.com/cables.htm. Tell them your measurements, and they will make a cable of any size up for you. Think I paid $45, but is a new cable and quite a bit more flexible then stock, for easier routing.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.