76 truck low back buckets on Ebay - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jonboy · 04-18-2005, 01:17 PM

I have a pair of buckets out of a 76 Chevy truck on ebay right now. They are actual pickup buckets, not the ones out of the swell Blazer in the pictures. The seats are clean, with no rips or tears in teh covers.
http://cgi.ebay.com/ebaymotors/ws/eB...sPageName=WDVW

f.monroe · 04-18-2005, 10:01 PM

Jonboy ,
What else would be needed to install these in a 1977 Truck ? I assume these are the same as 1977 seats. Are there any special floor mounts needed ? Do you know if there are any companies selling seat covers in the original patterns ? I might have to give these a thought since my 77 Bonanza has a couple small tears in the driver side seat anyway .Frank

Jonboy · 04-18-2005, 11:19 PM

Frank, there are brackets that weld to the flor to mount these. From the look of them, they would be pretty easy to make out of some steel strap. I think there are some pictures of the brackets floating around here. They stand about 3 inches tall in an inverted "V" shape. I picked the seats up, but the guy wouldn't let me have the floor brackets, unless I wanted the whole cab. I politely declined.

They are the same shape as the seats that were in my 77 Blazer, and the pattern matches the rear seat. My Blazer is a Cheyenne model. If you want them, I can get them to Leander if that is closer.

bigblock73 · 04-19-2005, 12:11 AM

Man, I wish I could find some seats as nice as those. I have two sets of truck buckets/brackets/consoles...but I need seats pretty bad.

f.monroe, here is a pic of the tabs you will need. If you end up getting Jonboys seats...and want dimensions...let me know. If you really want buckets in your truck, you need those seats and brackets...they are hard to find!

Jonboy, great auction you have...wish I could get my hand on the seats themselves.

f.monroe · 04-19-2005, 12:19 AM

Thanks for the pics of the brackets . Do you know if factory style seat covers are available anywhere ? Do you have any brackets that might be for sale ? Frank

bigblock73 · 04-19-2005, 12:21 AM

Quote:

Originally Posted by f.monroe

Thanks for the pics of the brackets . Do you know if factory style seat covers are available anywhere ? Do you have any brackets that might be for sale ? Frank

I have two sets, I will be using one in Yeller...the other is a spare for the future (so, I guess "no" is the answer). Classic Industries sells covers for these buckets...check them out.

Jonboy · 04-19-2005, 08:17 AM

Honestly, the seats don't need covers, since your interior is blue. They are pretty nice.

f.monroe · 04-19-2005, 10:23 PM

Jonboy,
What type of seat belts are used with these type of seats ? Were they still in the cab and are they available? Is there anything you need as a partial trader ?Frank

Jonboy · 04-19-2005, 10:27 PM

the truck they came out of just had some aftermarket looking belts. If they had been factory I would have liberated them as well. Can't think of anything I really need right now, save for a really nice 81-up dash pad.

low 84 · 04-20-2005, 12:18 AM

i never understood the big deal about those little inside mount brackets. looks like it could be made in about 5 min with a 1"x1/8" piece of steel

superchevy · 04-20-2005, 09:52 AM

Hey Jeff, I could use the dimensions of the brackets as I bought a set of low-back buckets from JonBoy and need to fab them up for mounting. If you could, please email them to me at carpediem_00@yahoo.com Thanks, Casey.

f.monroe · 04-20-2005, 08:40 PM

What is the going price on a pair of these . I have never considered them before seeing this link .I wouldnt mind a set now that I think of it . Superchevy , are yours for sale by any chance ?Thanks Frank

superchevy · 04-20-2005, 08:42 PM

Hi Frank, no, mine aren't for sale...going in my '81.
Would like to get those bracket dimensions though.
Later, Casey

bigblock73 · 04-28-2005, 08:30 AM

Superchevy, just came back to this post and saw you needed dimensions for the floor tabs. I will get them for you tonight or tomorrow.

Ryan, yes...they would be easy to make...but it is always nice to have the originals...or at least the original dimensions.

04-18-2005, 01:17 PM	#1
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	76 truck low back buckets on Ebay I have a pair of buckets out of a 76 Chevy truck on ebay right now. They are actual pickup buckets, not the ones out of the swell Blazer in the pictures. The seats are clean, with no rips or tears in teh covers. http://cgi.ebay.com/ebaymotors/ws/eB...sPageName=WDVW __________________ 1974 Jimmy- 5.3/4L80e/NP241

04-18-2005, 10:01 PM	#2
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Seats Jonboy , What else would be needed to install these in a 1977 Truck ? I assume these are the same as 1977 seats. Are there any special floor mounts needed ? Do you know if there are any companies selling seat covers in the original patterns ? I might have to give these a thought since my 77 Bonanza has a couple small tears in the driver side seat anyway .Frank

04-18-2005, 11:19 PM	#3
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Frank, there are brackets that weld to the flor to mount these. From the look of them, they would be pretty easy to make out of some steel strap. I think there are some pictures of the brackets floating around here. They stand about 3 inches tall in an inverted "V" shape. I picked the seats up, but the guy wouldn't let me have the floor brackets, unless I wanted the whole cab. I politely declined. They are the same shape as the seats that were in my 77 Blazer, and the pattern matches the rear seat. My Blazer is a Cheyenne model. If you want them, I can get them to Leander if that is closer. __________________ 1974 Jimmy- 5.3/4L80e/NP241

04-19-2005, 12:11 AM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Man, I wish I could find some seats as nice as those. I have two sets of truck buckets/brackets/consoles...but I need seats pretty bad. f.monroe, here is a pic of the tabs you will need. If you end up getting Jonboys seats...and want dimensions...let me know. If you really want buckets in your truck, you need those seats and brackets...they are hard to find! Jonboy, great auction you have...wish I could get my hand on the seats themselves. Attached Images __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

04-19-2005, 12:19 AM	#5
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Brackets Thanks for the pics of the brackets . Do you know if factory style seat covers are available anywhere ? Do you have any brackets that might be for sale ? Frank

04-19-2005, 08:17 AM	#7
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Honestly, the seats don't need covers, since your interior is blue. They are pretty nice. __________________ 1974 Jimmy- 5.3/4L80e/NP241

04-19-2005, 10:23 PM	#8
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Jonboy, What type of seat belts are used with these type of seats ? Were they still in the cab and are they available? Is there anything you need as a partial trader ?Frank

04-19-2005, 10:27 PM	#9
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	the truck they came out of just had some aftermarket looking belts. If they had been factory I would have liberated them as well. Can't think of anything I really need right now, save for a really nice 81-up dash pad. __________________ 1974 Jimmy- 5.3/4L80e/NP241

04-20-2005, 12:18 AM	#10
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	i never understood the big deal about those little inside mount brackets. looks like it could be made in about 5 min with a 1"x1/8" piece of steel __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's Last edited by low 84; 04-20-2005 at 12:18 AM.

04-20-2005, 09:52 AM	#11
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Hey Jeff, I could use the dimensions of the brackets as I bought a set of low-back buckets from JonBoy and need to fab them up for mounting. If you could, please email them to me at carpediem_00@yahoo.com Thanks, Casey. __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

04-20-2005, 08:40 PM	#12
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	seats What is the going price on a pair of these . I have never considered them before seeing this link .I wouldnt mind a set now that I think of it . Superchevy , are yours for sale by any chance ?Thanks Frank

04-20-2005, 08:42 PM	#13
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Hi Frank, no, mine aren't for sale...going in my '81. Would like to get those bracket dimensions though. Later, Casey __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

04-28-2005, 08:30 AM	#14
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Superchevy, just came back to this post and saw you needed dimensions for the floor tabs. I will get them for you tonight or tomorrow. Ryan, yes...they would be easy to make...but it is always nice to have the originals...or at least the original dimensions. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 04-28-2005 at 08:31 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.