|
|
|
05-10-2005, 06:22 PM
|
#1 |
|
Registered User
Join Date: May 2003
Location: Dayton, Tx (in Old River)
Posts: 286
|
Attaching A-Arms
Anyone ever have trouble putting 73-87 bottom A-Arms on a 70 crossmember...getting the pins to line up properly???...that and the same year U-bolts being a little large. I see that the 70's Ubolts are a size smaller....I put the Ubolts in the vise and gently squeezed...took care of that problem....still the alignment pins.
I'd greatly appreciate anyone's feedback in this issue. Thanks... Billy G
__________________
My FAMOUS LAST WORDS...."Ima Gonna!!" - 1970 GMC 1500 swb/step 250 I-6 3 spd - "The GEM" - 1976 Chev Scotsdale swb/step 350/350 - "The JEWEL" - 1982 Chev C-10 swb/step 250 I-6 3 spd - - 2001 Chev Silverado LT - |
|
|
|
05-11-2005, 06:47 AM
|
#2 |
|
Registered User
Join Date: May 2003
Location: Dayton, Tx (in Old River)
Posts: 286
|
ttt
__________________
My FAMOUS LAST WORDS...."Ima Gonna!!" - 1970 GMC 1500 swb/step 250 I-6 3 spd - "The GEM" - 1976 Chev Scotsdale swb/step 350/350 - "The JEWEL" - 1982 Chev C-10 swb/step 250 I-6 3 spd - - 2001 Chev Silverado LT - |
|
|
|
|
05-11-2005, 07:36 AM
|
#3 |
|
blood type; Retumbo
Join Date: Jan 2004
Location: next to my reloading bench
Posts: 10,269
|
I have never done this. but why would you use the later arms with the sloppy rubber bushings? 73-87 ball joints will fit the 70 arms & then you will have more accurate & ridgid suspension.
what I have heard of is using the "saddles" with the larger pins & u-bolts from later. just cut the rivets off & install them on your 70 with some leaf spring center bolts.
__________________
Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card |
|
|
|
|
05-11-2005, 08:15 AM
|
#4 |
|
Weekend Warrior
Join Date: Oct 2004
Location: CT
Posts: 1,787
|
I had a little bit of an issue when doing it - but i used the '69's u-bolts. the pins lined up but it took a bit of cussing and getting pissed.
keep trying man they should go in
__________________
-'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered   
|
|
|
|
|
05-11-2005, 08:55 PM
|
#5 |
|
Registered User
Join Date: May 2003
Location: Dayton, Tx (in Old River)
Posts: 286
|
Got em in...just took the right words....lol....and attitude. Put little floor jack under the arm....lifted the arm into place by hand...then supported. Worked like a champ on the 2nd side.
Thanks for the comments... Billy G
__________________
My FAMOUS LAST WORDS...."Ima Gonna!!" - 1970 GMC 1500 swb/step 250 I-6 3 spd - "The GEM" - 1976 Chev Scotsdale swb/step 350/350 - "The JEWEL" - 1982 Chev C-10 swb/step 250 I-6 3 spd - - 2001 Chev Silverado LT - |
|
|
|
|
05-11-2005, 11:04 PM
|
#6 | |
|
Weekend Warrior
Join Date: Oct 2004
Location: CT
Posts: 1,787
|
Quote:
See...sometimes you just gotta get mad at it and cuss a little...they eventually cooperate and if not you can always break out the "BFH" (Big F***** Hammer) or the "Firewrench" as i like to call it (oxy/fuel) 
__________________
-'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered
Last edited by arkracing; 05-11-2005 at 11:05 PM. |
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
