Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
06-08-2005, 09:19 PM | #1 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
WTB Crane Springs for stock heads
Got a killer deal on a comp cams 292 H want to get a set of Crane Hot Springs the kind that need no machining of the stock spring seats to use with this cam I believe rated for gross lift of .510 anyone have a set let me know with shipping to business 43758 thanks Mike
__________________
hav'n fun be'n me |
06-09-2005, 10:13 AM | #2 |
Registered User
Join Date: Feb 2004
Location: brownfield texas (west texas)
Posts: 1,936
|
springs
I got a set of comp cams triple springs good for up to .600 lift they are only about 3 months old they still have the yellow paint on them you can have them for 40.00 shipped to your house I will also include the steel retainers and locks too let me know. I dont know if you would have to machiene them to fit a small block they fit bb with out machiening ( they will work for both bb and sm chevy I do know that much I dont know the exact od but i can take a tape out there and give you a rough estimate if you want. there virtualy brand new. for what you save in springs even if you had to machiene the heads you would come out on top, take a look in jegs or summit on the comp triple springs
Last edited by Robznob11; 06-09-2005 at 10:23 AM. |
06-10-2005, 01:45 AM | #3 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
springs
thanks alot for the reply but the motor is together and I am just gonna switch cam etc and not pull the heads so I really need to stick with stock on the bottom diameter spring thanks again Mike
__________________
hav'n fun be'n me |
Bookmarks |
|
|