Rearends - The 1947 - Present Chevrolet & GMC Truck Message Board Network

82c10 · 06-10-2005, 09:28 PM

what is the best posi rearend?price? what is the cheapest?

82c10 · 06-10-2005, 10:22 PM

i meant who makes the best posi unit, i have a 12 bolt rearend

Earl Filter · 06-11-2005, 10:03 AM

It's generally accepted that for an all-around posi or limited-slip, to go with an Eaton. There are some cheaper ways to go (not by much), but an Eaton is strong, and it's rebuildable later if it wears out. Other options are an Auburn (I think they have 'em for a 12-bolt), a Powertrax, and an ARB air-locker (not really for a regular street truck). There are other ones out there, but those come to mind. I'd go with the Eaton as that is what most are familiar with installing.

phantom dually · 06-11-2005, 11:59 AM

Eaton would be my choice.

78' Silverado · 06-11-2005, 09:02 PM

Pretty much some part you really need to pay for quality. Tranny and rearends and most the key components of a truck should be GOOD QUALITY stuff...not wats cheapest...itll only break in hte long run. Eaton is a great company. I'd def go with them =D I am looking at a posi unti for my 04 Truck looking at around 450+ for mine =X

06-10-2005, 09:28 PM	#1
82c10 needin' money Join Date: May 2005 Location: Chickasha, Oklahoma Posts: 1,106	Rearends what is the best posi rearend?price? what is the cheapest?

06-11-2005, 10:03 AM	#3
Earl Filter Registered User Join Date: May 2005 Posts: 212	It's generally accepted that for an all-around posi or limited-slip, to go with an Eaton. There are some cheaper ways to go (not by much), but an Eaton is strong, and it's rebuildable later if it wears out. Other options are an Auburn (I think they have 'em for a 12-bolt), a Powertrax, and an ARB air-locker (not really for a regular street truck). There are other ones out there, but those come to mind. I'd go with the Eaton as that is what most are familiar with installing. __________________ Real Name - Brandon Current Vehicles: 1977 C20 Silverado 454/TH400 3.73s 1989 Jaguar XJ6 in the middle of an LT1/4L60E swap

06-11-2005, 11:59 AM	#4
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Eaton would be my choice. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

06-11-2005, 09:02 PM	#5
78' Silverado \/ My Loves \/ Join Date: Mar 2003 Location: Midland,Texas Posts: 462	Pretty much some part you really need to pay for quality. Tranny and rearends and most the key components of a truck should be GOOD QUALITY stuff...not wats cheapest...itll only break in hte long run. Eaton is a great company. I'd def go with them =D I am looking at a posi unti for my 04 Truck looking at around 450+ for mine =X __________________ 78' Silverado - Blue - (In a Coma) 04' Silverado -Red- 383 Stroker in progress for the 78'!!!

06-10-2005, 10:22 PM	#2
82c10 needin' money Join Date: May 2005 Location: Chickasha, Oklahoma Posts: 1,106	i meant who makes the best posi unit, i have a 12 bolt rearend



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.