Parting 62 Project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Toddro · 06-25-2005, 11:37 PM

Hey folks! I have a 62 Chevy that I pulled apart to rebuild a few years ago, and ran out of both time and money, and it's been sitting (inside) until recently when I lost my storage. Now I need to get rid of it. Wish I didn't have to give up on it, but I've moved on to other projects. I'm hoping some of the parts will help someone else with their project.

Here's what's available:

1962 modified shortbed frame: The frame has been shortened to the same wheelbase as a blazer. It has also been narrowed in the rear, as I was planning on pro-streeting it. The front suspension is from a 72 chevy; it also has AIM 2" dropped lower control arms, 1" cut coils, and Chisolm dropped upper control arms.

Cab: has rust in the floors, all corners. I was told by a body shop that it was repairable, but would cost about $600 to fix it. Small rust pinholes along top of windsheild. Windshield is good, as is small back glass.

Doors: Pretty good shape, good glass. Usual rust, but they were dented by someone unknown while the truck was in storage (nice, huh?)

Front clip: Average shape, rear of fenders are rusty and need fixed; I have patch panels for the fenders. The inner fenders have the usual rust but are repairable. The hood is in good shape except that it has several high-point dents in it. Fixable. The grill is steel and in pretty good shape.

Bed: Unique 5' bed length. I was going to join it to the cab and have the world's only 62 Blazer. Bed is in bad shape, I was saving it for a template to build a new one.

I have some misc parts, but alot of stuff has disappeared over the years.

I'm asking $400 for the whole thing, and I'd rather sell it all together than part it, but I guess we'll see?

If anybody's interested let me know. I don't have anyway of shipping this thing, so I would rather you come to get it. The truck is located in southern Illinois.

This will be my first time posting pics, so I hope I do it right.....

c-1072 · 06-26-2005, 12:03 AM

if you want to part it i need some stuff . front suspension looks good to me

624whldr · 06-26-2005, 06:52 AM

i need a good passenger side door minor work need is ok it will have to be shipped ti nj if interested here my email address
edneed20@comcast.net
Thanks Ed

Toddro · 06-26-2005, 01:18 PM

Quote:

Originally Posted by 624whldr

i need a good passenger side door minor work need is ok it will have to be shipped ti nj if interested here my email address
edneed20@comcast.net
Thanks Ed

Hey Ed. Sent you an email with more pics. Not sure about shipping any of this, never shipped anything this big before?

c-1072 · 06-26-2005, 03:20 PM

Need a good regulator for the drivers side . I would be willing to buy the entire front cross member brakes ect . does it have a power brake booster ?

Toddro · 06-26-2005, 04:59 PM

Quote:

Originally Posted by c-1072

Need a good regulator for the drivers side . I would be willing to buy the entire front cross member brakes ect . does it have a power brake booster ?

C-1072, The regulator works well on both sides. It does have a brake booster, but it's from a 70's model Monte Carlo. I would be willing to sell you the front crossmember, etc. but the crossmember is welded in. Any chance you'd be interested in the entire frame?

c-1072 · 06-26-2005, 05:13 PM

I couldnt get the frame its a little far for me . If you want you could just unbolt the controll arms and and ship the stuff greyhound .Do you know what year the spindles are ? are they stock or dropped ? Any idea on a price ?

gostranger · 06-27-2005, 02:49 PM

i pmed you about your truck for sale thanks

gostranger · 06-28-2005, 08:10 AM

i would like to get ahold of you asap about the truck let me know thanks

gostranger · 06-29-2005, 11:36 AM

i am interested in your truck can you email me as soon as you can thanks

dloughney@ultrafab.com

gostranger · 06-30-2005, 06:23 AM

i got your pm but it just said i pmed you please get in touch with me asap thanks

gostranger · 06-30-2005, 06:28 AM

check your pms thanks

raphyel · 07-02-2005, 04:31 PM

What shape are trhe doors in??? I am looking for two doors that can be repaired. If the door bottom is bad thats fine as long as no dents or bondo.

Raphyel

Toddro · 07-04-2005, 06:07 PM

Quote:

Originally Posted by raphyel

What shape are trhe doors in??? I am looking for two doors that can be repaired. If the door bottom is bad thats fine as long as no dents or bondo.

Raphyel

Raphyel, the doors have both dents and Bondo. If you look at the pics you can see both of them. However, they are repairable. Let me know if you are still interested.

lngbed71 · 07-06-2005, 11:48 AM

Gas pedal?? Very interested in that

Toddro · 07-06-2005, 09:44 PM

Quote:

Originally Posted by lngbed71

Gas pedal?? Very interested in that

Neat, huh? Don't see many of those anymore...

How about $10 plus shipping? PM me your zip and I'll find out the shipping cost for you.

Toddro · 08-02-2005, 11:27 AM

TTT - Still got this thing and I'm losing storage. Anybody need anything? I'd hate to scrap it...

624whldr · 08-11-2005, 08:51 PM

i d like the gas pedal for my 62. are you willing to cut a piece off the cab and ship it, about 1 ft square if its not a rotton, it would be the outter vent box on the drivers side i need the lower half start about even with the door check straight foward, i need the spot welded cover piece that cover the in side vent
please let me know
Ed
shipping zip 08201 email edneed20@comcast.net

onetoncrewcab · 08-04-2005, 07:03 PM

I could use the front clip and box.

I'm in South Dakota and could drive over to pick it up if the price is right.

Mike

onetoncrewcab · 08-06-2005, 10:04 AM

Oops...I am interested in the front clip and doors instead. I did not see the box was hacked up.
Mike

Toddro · 08-11-2005, 05:45 PM

Quote:

Originally Posted by 1TonCrewCab

Oops...I am interested in the front clip and doors instead. I did not see the box was hacked up.
Mike

1Ton, if you are willing to come and get it, I'll sell you the front clip for $75 and the doors for $50. That too much?

Deuce · 08-09-2005, 12:27 AM

Put me in line for the control arms IF they aren't sold yet.

onetoncrewcab · 09-05-2005, 05:23 PM

Sorry about not getting back sooner. The guy that I got the truck from moved to MN but he had the title at one of those payday loan places. He was coming back from MN to get the rest of his stuff and he was going to get the title out of hock. He came back and promptly disapeared without getting the title. Really not a big deal to me...I have a truck that I haven't paid for. I drove it until the tags expired in August. But now I have a truck without a title, no tags, and Lord only knows where he is in MN.

So...until I get something figured out on this, I'll have to pass. The price was excellent too.

Mike

wadeg77 · 09-06-2005, 07:59 AM

hi im trying to locate a windsheild for my dads 62 panel unfortunaly your truck is in illinois im in mass. also you werent sure about parting out but incase u you change your mind i may need some other parts as well. i will pay shipping. thanks

Toddro · 09-09-2005, 05:25 PM

Quote:

Originally Posted by wadeg77

hi im trying to locate a windsheild for my dads 62 panel unfortunaly your truck is in illinois im in mass. also you werent sure about parting out but incase u you change your mind i may need some other parts as well. i will pay shipping. thanks

Wadeg, I can part it, but I really don't want to ship anything unless it's small. Let me know what you need....

06-25-2005, 11:37 PM	#1
Toddro Registered User Join Date: Jan 2001 Location: Fairfield, IL Posts: 42	Parting 62 Project Hey folks! I have a 62 Chevy that I pulled apart to rebuild a few years ago, and ran out of both time and money, and it's been sitting (inside) until recently when I lost my storage. Now I need to get rid of it. Wish I didn't have to give up on it, but I've moved on to other projects. I'm hoping some of the parts will help someone else with their project. Here's what's available: 1962 modified shortbed frame: The frame has been shortened to the same wheelbase as a blazer. It has also been narrowed in the rear, as I was planning on pro-streeting it. The front suspension is from a 72 chevy; it also has AIM 2" dropped lower control arms, 1" cut coils, and Chisolm dropped upper control arms. Cab: has rust in the floors, all corners. I was told by a body shop that it was repairable, but would cost about $600 to fix it. Small rust pinholes along top of windsheild. Windshield is good, as is small back glass. Doors: Pretty good shape, good glass. Usual rust, but they were dented by someone unknown while the truck was in storage (nice, huh?) Front clip: Average shape, rear of fenders are rusty and need fixed; I have patch panels for the fenders. The inner fenders have the usual rust but are repairable. The hood is in good shape except that it has several high-point dents in it. Fixable. The grill is steel and in pretty good shape. Bed: Unique 5' bed length. I was going to join it to the cab and have the world's only 62 Blazer. Bed is in bad shape, I was saving it for a template to build a new one. I have some misc parts, but alot of stuff has disappeared over the years. I'm asking $400 for the whole thing, and I'd rather sell it all together than part it, but I guess we'll see? If anybody's interested let me know. I don't have anyway of shipping this thing, so I would rather you come to get it. The truck is located in southern Illinois. This will be my first time posting pics, so I hope I do it right..... Attached Images

06-26-2005, 12:03 AM	#2
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	front suspension if you want to part it i need some stuff . front suspension looks good to me

06-26-2005, 06:52 AM	#3
624whldr drive it not trailer it Join Date: Feb 2005 Location: So Jersey Posts: 64	passenger side door i need a good passenger side door minor work need is ok it will have to be shipped ti nj if interested here my email address edneed20@comcast.net Thanks Ed

06-26-2005, 03:20 PM	#5
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	I also need window regulators Need a good regulator for the drivers side . I would be willing to buy the entire front cross member brakes ect . does it have a power brake booster ?

06-26-2005, 05:13 PM	#7
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	front cross member I couldnt get the frame its a little far for me . If you want you could just unbolt the controll arms and and ship the stuff greyhound .Do you know what year the spindles are ? are they stock or dropped ? Any idea on a price ? Last edited by c-1072; 06-26-2005 at 05:14 PM.

06-27-2005, 02:49 PM	#8
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	i pmed you about your truck for sale thanks

06-28-2005, 08:10 AM	#9
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	i would like to get ahold of you asap about the truck let me know thanks

06-29-2005, 11:36 AM	#10
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	i am interested in your truck can you email me as soon as you can thanks dloughney@ultrafab.com

06-30-2005, 06:23 AM	#11
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	i got your pm but it just said i pmed you please get in touch with me asap thanks

06-30-2005, 06:28 AM	#12
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	check your pms thanks

07-02-2005, 04:31 PM	#13
raphyel Registered User Join Date: Aug 2004 Location: Cranston, RI Posts: 162	Doors What shape are trhe doors in??? I am looking for two doors that can be repaired. If the door bottom is bad thats fine as long as no dents or bondo. Raphyel

07-06-2005, 11:48 AM	#15
lngbed71 Nothing fits but the oil Join Date: Mar 2003 Location: Gaston, Indiana Posts: 424	Gas pedal?? Very interested in that __________________ Land of the free Because of the brave

08-02-2005, 11:27 AM	#17
Toddro Registered User Join Date: Jan 2001 Location: Fairfield, IL Posts: 42	TTT - Still got this thing and I'm losing storage. Anybody need anything? I'd hate to scrap it... __________________ '70 Chevy C10 longbed: bone-stock! '72 Lincoln Mark IV: yeah, I know it's a Ford, but it's cool! Soon to be smoothed and bagged...

08-11-2005, 08:51 PM	#18
624whldr drive it not trailer it Join Date: Feb 2005 Location: So Jersey Posts: 64	dont laugh but i d like the gas pedal for my 62. are you willing to cut a piece off the cab and ship it, about 1 ft square if its not a rotton, it would be the outter vent box on the drivers side i need the lower half start about even with the door check straight foward, i need the spot welded cover piece that cover the in side vent please let me know Ed shipping zip 08201 email edneed20@comcast.net

08-04-2005, 07:03 PM	#19
onetoncrewcab One of my kids. Cute eh? Join Date: Oct 2001 Location: Mitchell, SD Posts: 1,286	I could use the front clip and box. I'm in South Dakota and could drive over to pick it up if the price is right. Mike __________________ If a kid asks where rain comes from, I think a cute thing to tell him is “God is crying.” And if he asks why God is crying, another cute thing to tell him is “Probably because of something you did. John 3:16 2006 Chevy HHR 2000 Dodge Durango 1985 Jeep CJ-7 1970 Chevy Pickup



Register or Log In To remove these advertisements.

08-06-2005, 10:04 AM	#20
onetoncrewcab One of my kids. Cute eh? Join Date: Oct 2001 Location: Mitchell, SD Posts: 1,286	Oops...I am interested in the front clip and doors instead. I did not see the box was hacked up. Mike __________________ If a kid asks where rain comes from, I think a cute thing to tell him is “God is crying.” And if he asks why God is crying, another cute thing to tell him is “Probably because of something you did. John 3:16 2006 Chevy HHR 2000 Dodge Durango 1985 Jeep CJ-7 1970 Chevy Pickup

08-09-2005, 12:27 AM	#22
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Put me in line for the control arms IF they aren't sold yet. __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

09-05-2005, 05:23 PM	#23
onetoncrewcab One of my kids. Cute eh? Join Date: Oct 2001 Location: Mitchell, SD Posts: 1,286	Sorry about not getting back sooner. The guy that I got the truck from moved to MN but he had the title at one of those payday loan places. He was coming back from MN to get the rest of his stuff and he was going to get the title out of hock. He came back and promptly disapeared without getting the title. Really not a big deal to me...I have a truck that I haven't paid for. I drove it until the tags expired in August. But now I have a truck without a title, no tags, and Lord only knows where he is in MN. So...until I get something figured out on this, I'll have to pass. The price was excellent too. Mike __________________ If a kid asks where rain comes from, I think a cute thing to tell him is “God is crying.” And if he asks why God is crying, another cute thing to tell him is “Probably because of something you did. John 3:16 2006 Chevy HHR 2000 Dodge Durango 1985 Jeep CJ-7 1970 Chevy Pickup

09-06-2005, 07:59 AM	#24
wadeg77 Registered User Join Date: Sep 2005 Location: ct Posts: 3	62 chevy hi im trying to locate a windsheild for my dads 62 panel unfortunaly your truck is in illinois im in mass. also you werent sure about parting out but incase u you change your mind i may need some other parts as well. i will pay shipping. thanks Last edited by wadeg77; 09-06-2005 at 08:02 AM.

Register or Log In To remove these advertisements.