Good source for 81-86 parts in N. Texas? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fade94 · 07-15-2005, 08:28 AM

I am trying to find a source for parts used or new in North Texas. I need the following for my son's 83.
Under hood harness (air and cruise)
In cab harness including door wiring (air, PW, PDL)
Rear leaf springs (I have been told short bed is different than long bed springs) I need the ones for short bed.
Inst. panel w/gauges.
Cruise/turn signal lever
Cruise parts from under hood.
Pass side fender
I have been able to find the fender and that's it.

kndall · 07-15-2005, 09:43 AM

Don't know if you want to drive this far or not but there is a salvage near downtown OKC that has quite a few trucks in this year model range that are pretty much complete.

Jonboy · 07-15-2005, 09:51 AM

the pick a parts in Grand Prairie, down on Jefferson and Davis, have tons of them. There are quite a few Suburbans in them, too.

fade94 · 07-15-2005, 09:54 AM

Thanks JonBoy. That's what I was wondering about. I have never been to one, how does it work? I have heard that it's $20 for all you can carry out.

Jonboy · 07-15-2005, 12:32 PM

Quote:

Originally Posted by fade94

Thanks JonBoy. That's what I was wondering about. I have never been to one, how does it work? I have heard that it's $20 for all you can carry out.

It depends on the yard. The one I frequent is $1 to get in, and they look at what you have and price it accordingly. It is kind of hit and miss. Sometimes you can make a killing on little stuff for next to nothing, or sometimes you pay what it is worth. Depends on the mood of the guy at the window. I put all of my little stuff in a bag, so that helps. Usually I am looking for the nuts and bolts to replace the stuff I lost.....

86 GMG · 07-15-2005, 11:40 AM

fade94 i can't say what this could help but i have an 85? no title parts truck i bought (long story but it had a motor also it is not stolen) but i want to make a trailer for my father in-law with the long bed, cab is off the truck right now and then i havnt touched it sence it got hot, a also have a 77 with a title i need to get rid of its rough as he!! but good parts if this could help i will give you a number to call be on and we can set up some arrangments pm me for the number

flip66 · 07-15-2005, 02:02 PM

fade94 there a bunch at the pick a part on old 75 in Dallas should have every thing you are looking for. There is price list for parts when you walk in. You can call me and I will give you directions

fade94 · 07-15-2005, 02:07 PM

Thanks flip

flip66 · 07-15-2005, 03:59 PM

Soto got a new truck and will be taking the motor and trans out of the white one he has then trying to sell it hole or parts it has a white face cluster and a straight front and doors and new GM hood. If you can wait about a month to give him enough time to make the swap I am sure you can get some of the parts

fade94 · 07-15-2005, 04:00 PM

Cool. I saw that he had replaced his doors with blue ones.

flip66 · 07-15-2005, 04:54 PM

interested I will let you know as soon as he gets it going

07-15-2005, 08:28 AM	#1
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Good source for 81-86 parts in N. Texas? I am trying to find a source for parts used or new in North Texas. I need the following for my son's 83. Under hood harness (air and cruise) In cab harness including door wiring (air, PW, PDL) Rear leaf springs (I have been told short bed is different than long bed springs) I need the ones for short bed. Inst. panel w/gauges. Cruise/turn signal lever Cruise parts from under hood. Pass side fender I have been able to find the fender and that's it. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

07-15-2005, 09:51 AM	#3
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	the pick a parts in Grand Prairie, down on Jefferson and Davis, have tons of them. There are quite a few Suburbans in them, too. __________________ 1974 Jimmy- 5.3/4L80e/NP241

07-15-2005, 09:54 AM	#4
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Thanks JonBoy. That's what I was wondering about. I have never been to one, how does it work? I have heard that it's $20 for all you can carry out. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

07-15-2005, 11:40 AM	#6
86 GMG Registered User Join Date: Apr 2005 Location: Tulsa Oklahoma Posts: 943	fade94 i can't say what this could help but i have an 85? no title parts truck i bought (long story but it had a motor also it is not stolen) but i want to make a trailer for my father in-law with the long bed, cab is off the truck right now and then i havnt touched it sence it got hot, a also have a 77 with a title i need to get rid of its rough as he!! but good parts if this could help i will give you a number to call be on and we can set up some arrangments pm me for the number __________________ square body trucks an addiction or an investment either way they consume all my extra time and money

07-15-2005, 02:02 PM	#7
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	fade94 there a bunch at the pick a part on old 75 in Dallas should have every thing you are looking for. There is price list for parts when you walk in. You can call me and I will give you directions __________________ 1998 Pontiac Grad Prix GTP 1969 C10 396 TH400 3.08 posi Last edited by flip66; 07-15-2005 at 02:03 PM.

07-15-2005, 09:43 AM	#2
kndall Registered User Join Date: Nov 2004 Location: Moore, OK..73160 Posts: 207	Don't know if you want to drive this far or not but there is a salvage near downtown OKC that has quite a few trucks in this year model range that are pretty much complete.

07-15-2005, 02:07 PM	#8
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Thanks flip __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

07-15-2005, 03:59 PM	#9
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	Soto got a new truck and will be taking the motor and trans out of the white one he has then trying to sell it hole or parts it has a white face cluster and a straight front and doors and new GM hood. If you can wait about a month to give him enough time to make the swap I am sure you can get some of the parts __________________ 1998 Pontiac Grad Prix GTP 1969 C10 396 TH400 3.08 posi

07-15-2005, 04:00 PM	#10
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Cool. I saw that he had replaced his doors with blue ones. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

07-15-2005, 04:54 PM	#11
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	interested I will let you know as soon as he gets it going __________________ 1998 Pontiac Grad Prix GTP 1969 C10 396 TH400 3.08 posi Last edited by flip66; 07-15-2005 at 04:54 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.