Consoles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ClassicTruckConsoles · 08-12-2005, 11:54 AM

Check out my site: http://www.classictruckconsoles.com/
Would like to see a console installed in 73-87 model year. Any questions I look forward to hearing from you.

bigarmzz · 08-12-2005, 12:09 PM

so you are gonna start making these for the 73-87's?

i put in bucket seats in my 87, and am open to ideas at this point

ClassicTruckConsoles · 08-12-2005, 12:20 PM

not necessarly, Consoles will fit just about any vehicle that has a transmission hump. Measurements are on the site they just need to be cut to fit. 59 Impala, 85 el camino and 01 suburban have installed consoles. I did the console for my truck and decided since I had a mold made why not offer them for the enthusist. I only had my truck to go by as to what it would fit than I met someone with a 62 and measurements worked same with the el camino. Just need to use your immagination

79BIG10 · 08-12-2005, 01:35 PM

If you're willing to donate one I'll be more than happy to install it in mine with a floor shifter I'd buy.

ClassicTruckConsoles · 08-12-2005, 02:29 PM

I am already a resigter member. Check with Josh or Liz. When can I expect your order?

bigarmzz · 08-12-2005, 02:57 PM

i just clicked on your avatar there...

the console looks nice....what material is that made of???

ClassicTruckConsoles · 08-14-2005, 11:15 AM

Made of Fiberglass by a Boat mfg.

08-12-2005, 11:54 AM	#1
ClassicTruckConsoles Registered User Join Date: May 2002 Location: tavernier, fl. usa Posts: 29	Consoles Check out my site: http://www.classictruckconsoles.com/ Would like to see a console installed in 73-87 model year. Any questions I look forward to hearing from you.

08-12-2005, 12:09 PM	#2
bigarmzz Registered User Join Date: Sep 2004 Location: Elkins, West Virginia Posts: 2,542	so you are gonna start making these for the 73-87's? i put in bucket seats in my 87, and am open to ideas at this point __________________ 1987 350 TBI lowered 5/7

08-12-2005, 01:35 PM	#4
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	If you're willing to donate one I'll be more than happy to install it in mine with a floor shifter I'd buy. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

08-12-2005, 02:29 PM	#5
ClassicTruckConsoles Registered User Join Date: May 2002 Location: tavernier, fl. usa Posts: 29	consoles I am already a resigter member. Check with Josh or Liz. When can I expect your order?

08-12-2005, 02:57 PM	#6
bigarmzz Registered User Join Date: Sep 2004 Location: Elkins, West Virginia Posts: 2,542	i just clicked on your avatar there... the console looks nice....what material is that made of??? __________________ 1987 350 TBI lowered 5/7

08-12-2005, 12:20 PM	#3
ClassicTruckConsoles Registered User Join Date: May 2002 Location: tavernier, fl. usa Posts: 29	not necessarly, Consoles will fit just about any vehicle that has a transmission hump. Measurements are on the site they just need to be cut to fit. 59 Impala, 85 el camino and 01 suburban have installed consoles. I did the console for my truck and decided since I had a mold made why not offer them for the enthusist. I only had my truck to go by as to what it would fit than I met someone with a 62 and measurements worked same with the el camino. Just need to use your immagination

08-14-2005, 11:15 AM	#7
ClassicTruckConsoles Registered User Join Date: May 2002 Location: tavernier, fl. usa Posts: 29	Made of Fiberglass by a Boat mfg.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.