60-63 One Piece Windows - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frizzle Fry · 09-13-2005, 04:04 PM

I'm in the process of fabing up a one piece window set up for my '61. After I started the mod I saw a '63 in a mag with one piece windows. Anyone know of a manufacturer or done it yourself. I have the details of mine pretty well set but I'm just curious here.

bpmcgee · 09-13-2005, 05:03 PM

How are you doing this? Isn't the window opening larger at the top than the bottom?

Brian

Panelrodder · 09-13-2005, 05:11 PM

Quote:

Originally Posted by Frizzle Fry

I'm in the process of fabing up a one piece window set up for my '61. After I started the mod I saw a '63 in a mag with one piece windows. Anyone know of a manufacturer or done it yourself. I have the details of mine pretty well set but I'm just curious here.

I've seen it in the mags too. I'm sure it was project Old Skool. Classic Trucks was the mag I think. Check out the site for details. I know that they are there. Classic Trucks has always been good about including the company name and contact info for all the products that they install or have installed.

PanelRodder

Frizzle Fry · 09-13-2005, 05:46 PM

Quote:

Originally Posted by bpmcgee

How are you doing this? Isn't the window opening larger at the top than the bottom?

Brian

Nope, but the window does have to tilt back as it goes down. I'm using power regulators from a 1998 Chevy truck (the rear of the window moves down faster than the front).

Quote:

Originally Posted by Panelrodder

I've seen it in the mags too. I'm sure it was project Old Skool. Classic Trucks was the mag I think. Check out the site for details. I know that they are there. Classic Trucks has always been good about including the company name and contact info for all the products that they install or have installed.

PanelRodder

Project old skool is a 64-66. There are kits for those.

64 cput · 09-13-2005, 10:24 PM

No Limit Engineering, San Bernadino, Ca has a unit for 64-66's. Didn't see one for a 61 but stranger things have happened. Hope it helps.

Frizzle Fry · 09-15-2005, 02:20 AM

Thanks. Just looking for 60-63. I't a whole different ball game with these.

coolair · 09-15-2005, 02:16 PM

A friend/co-worker has a 63 with one piece glass and it rolls down....about an inch. We've looked at ways to make it roll all the way down but do not think it is possible.......would be happy for someone to prove us wrong!

Frizzle Fry · 09-15-2005, 03:53 PM

I've done some mocking up and it is possible. The window just has to tilt as it drops to prevent the lower rear corner from hitting the door latch. I guess I'll just go with my plan and let you guys know how it turns out. If anyone finds anything else, please post!

Chevyboy1962 · 09-17-2005, 03:24 PM

I've came up with 2 ways to do the 1 piece windows on the '60-'63 trucks.

The first one I thought of was reworking the top of the inner side of the door(vent area), and the "A" pillar on the cab. I was going to striaghten the inner side more straight up & down, but with the door shut, it still has the original angle on hte door. The cab "A" pillar will also need to be more up & downwards to match the reworked door.

The other idea I came up with was use the window channels from a the rear doors of a Hon-duh import. Using these will rotate the glass towards the bed like it will spin around & go down into the doors. My nieghbors car gave this one.

David

Frizzle Fry · 09-17-2005, 05:51 PM

Quote:

Originally Posted by Chevyboy1962

I've came up with 2 ways to do the 1 piece windows on the '60-'63 trucks.

The first one I thought of was reworking the top of the inner side of the door(vent area), and the "A" pillar on the cab. I was going to striaghten the inner side more straight up & down, but with the door shut, it still has the original angle on hte door. The cab "A" pillar will also need to be more up & downwards to match the reworked door.

The other idea I came up with was use the window channels from a the rear doors of a Hon-duh import. Using these will rotate the glass towards the bed like it will spin around & go down into the doors. My nieghbors car gave this one.

David

That first idea sounds interesting, but would be a lot of work. Your second suggestion is basically what I'm doing with the 1998 Chevy truck regulators. I wonder if the Honda regulators are a scissors type or not? Thanks for the input

62chevy302 · 05-10-2013, 10:33 AM

do a search. somebody on here has the link to a the window kit. I found it

http://www.classictruckglass.com/ind...TOKEN=48279704

here is the power setup.

http://www.classictruckglass.com/ind...TOKEN=48279704

62 short step · 05-10-2013, 03:53 PM

Sweet! Would love to hear from someone who has used this kit.

forestb · 05-10-2013, 04:25 PM

The web sight says 60-63 But the photo sure looks like 64-66 glass to me. They also have the glass for the gauge cluster. I wonder if it has the numbers embossed like the factory plastic ones.

**Captainfab** · 05-11-2013, 12:50 AM

It has been done right here on the forum........

http://www.67-72chevytrucks.com/vboa...=324303&page=4

als1961 · 05-13-2013, 06:46 PM

i purchased the kit referenced above, and its a complete set-up however its no the easiest to install. After attempting to install it myself i gave up. The main problem is the felt, which is loose and sloppy. The glass is cut at the right angles, but if not set right the window will bind. The customer service is pretty awesome, they have a guy there who will talk you through the install. Overall its worth a try.

09-13-2005, 04:04 PM	#1
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	60-63 One Piece Windows I'm in the process of fabing up a one piece window set up for my '61. After I started the mod I saw a '63 in a mag with one piece windows. Anyone know of a manufacturer or done it yourself. I have the details of mine pretty well set but I'm just curious here.

09-17-2005, 03:24 PM	#9
Chevyboy1962 C10 now is a GMC Join Date: Jun 2003 Location: Modesto, Ca Posts: 740	I've came up with 2 ways to do the 1 piece windows on the '60-'63 trucks. The first one I thought of was reworking the top of the inner side of the door(vent area), and the "A" pillar on the cab. I was going to striaghten the inner side more straight up & down, but with the door shut, it still has the original angle on hte door. The cab "A" pillar will also need to be more up & downwards to match the reworked door. The other idea I came up with was use the window channels from a the rear doors of a Hon-duh import. Using these will rotate the glass towards the bed like it will spin around & go down into the doors. My nieghbors car gave this one. David __________________ 1962 C10 swb fleetside, big window, custom cab 350/TH350 combo...Hot Rod 1963 C10 lwb fleetside, small window 230/4 speed...Blvd Cruiser *1931 Ford 5 window coupe (soon to be Hot Rod)... Father & Son project

05-10-2013, 10:33 AM	#11
62chevy302 hillbilly Join Date: Apr 2007 Location: hampton,tn Posts: 459	Re: 60-63 One Piece Windows do a search. somebody on here has the link to a the window kit. I found it http://www.classictruckglass.com/ind...TOKEN=48279704 here is the power setup. http://www.classictruckglass.com/ind...TOKEN=48279704 __________________ -1962 C-10 Last edited by 62chevy302; 05-10-2013 at 10:51 AM. Reason: link

05-10-2013, 03:53 PM	#12
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: 60-63 One Piece Windows Sweet! Would love to hear from someone who has used this kit. __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

05-10-2013, 04:25 PM	#13
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: 60-63 One Piece Windows The web sight says 60-63 But the photo sure looks like 64-66 glass to me. They also have the glass for the gauge cluster. I wonder if it has the numbers embossed like the factory plastic ones.

09-13-2005, 05:03 PM	#2
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	How are you doing this? Isn't the window opening larger at the top than the bottom? Brian

09-13-2005, 10:24 PM	#5
64 cput Registered User Join Date: Mar 2005 Posts: 3	No Limit Engineering, San Bernadino, Ca has a unit for 64-66's. Didn't see one for a 61 but stranger things have happened. Hope it helps.

09-15-2005, 02:20 AM	#6
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Thanks. Just looking for 60-63. I't a whole different ball game with these.

09-15-2005, 02:16 PM	#7
coolair Registered User Join Date: Sep 2005 Location: Osage, IA Posts: 161	A friend/co-worker has a 63 with one piece glass and it rolls down....about an inch. We've looked at ways to make it roll all the way down but do not think it is possible.......would be happy for someone to prove us wrong!

09-15-2005, 03:53 PM	#8
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	I've done some mocking up and it is possible. The window just has to tilt as it drops to prevent the lower rear corner from hitting the door latch. I guess I'll just go with my plan and let you guys know how it turns out. If anyone finds anything else, please post!

05-11-2013, 12:50 AM	#14
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 60-63 One Piece Windows It has been done right here on the forum........ http://www.67-72chevytrucks.com/vboa...=324303&page=4 __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

05-13-2013, 06:46 PM	#15
als1961 Registered User Join Date: Apr 2012 Location: san luis obispo, ca Posts: 21	Re: 60-63 One Piece Windows i purchased the kit referenced above, and its a complete set-up however its no the easiest to install. After attempting to install it myself i gave up. The main problem is the felt, which is loose and sloppy. The glass is cut at the right angles, but if not set right the window will bind. The customer service is pretty awesome, they have a guy there who will talk you through the install. Overall its worth a try.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.