Parting 72 Blazer 4X4 Chassis.. Seattle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Livrat · 09-16-2005, 09:40 AM

Frame is tweaked.. Previous owner put on a 71 C20 Big block cab and cut the roof off.. Cab is junk.. No gas tank..

3:08 Ratio non-posi 12 bolt.. $200 drum to drum..
Dana 44 Front axle hub to hub.. $100..
Turbo 350 W/NP205 transfer case $350
Engine crossmember $50
Rear crossmember for the skid plate $25
No real goodies with the exception of a Big block heat shield on the firewall.. a Big block "No Hole" "Tall Hump" transmission cover and an auxillary battery box..

I bought it for the engine, 4" lift kit and frame/steering reinforcement plate and auxillary battery box..

The frame itself and whats left of the cab (gutted )..heads to the scrapper today
PLEASE...Local pickup only..

Big Bad 1972 Blazer · 09-16-2005, 11:05 AM

If nobody gets the frame from you and if it's in decent shape, would you be willing to cut the front of the frame on both rails back to the core support body mounts off? PM me if so, I'm looking for these hunks of the frame to repair my '72.

**PICKMUP** · 09-16-2005, 12:06 PM

I'll take the skid plate cross member and maybe the aux bat box. Can I get a price & condition on the box?
Thanks,
Frank

Livrat · 09-17-2005, 10:17 AM

Big Bad 1972 Blazer... the front frame pieces have been wrecked,straightened, drilled and welded upon and are really ugly.. dont really think you would want them..

**PICKMUP** · 09-19-2005, 11:46 PM

Mark,
I don't want to hijack your thread, but this will bring it back to top.

BB72BLZR: I sent you a PM telling you I had a nice Blazer frame and would cut off the front frame sections for you. Did you get the PM?

4bynut · 09-20-2005, 03:02 AM

Hey LIVRAT, if you haven't scrap the frame yet. Are the front hangers for the rear leaf springs good and how much for the pair. Thank's Jason

09-16-2005, 09:40 AM	#1
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Parting 72 Blazer 4X4 Chassis.. Seattle Frame is tweaked.. Previous owner put on a 71 C20 Big block cab and cut the roof off.. Cab is junk.. No gas tank.. 3:08 Ratio non-posi 12 bolt.. $200 drum to drum.. Dana 44 Front axle hub to hub.. $100.. Turbo 350 W/NP205 transfer case $350 Engine crossmember $50 Rear crossmember for the skid plate $25 No real goodies with the exception of a Big block heat shield on the firewall.. a Big block "No Hole" "Tall Hump" transmission cover and an auxillary battery box.. I bought it for the engine, 4" lift kit and frame/steering reinforcement plate and auxillary battery box.. The frame itself and whats left of the cab (gutted )..heads to the scrapper today PLEASE...Local pickup only..

09-16-2005, 12:06 PM	#3
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,160	I'll take the skid plate cross member and maybe the aux bat box. Can I get a price & condition on the box? Thanks, Frank __________________ Email: frankeham@comcast.net Phone: 360-956-7170

09-19-2005, 11:46 PM	#5
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,160	Mark, I don't want to hijack your thread, but this will bring it back to top. BB72BLZR: I sent you a PM telling you I had a nice Blazer frame and would cut off the front frame sections for you. Did you get the PM? __________________ Email: frankeham@comcast.net Phone: 360-956-7170

09-20-2005, 03:02 AM	#6
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Hey LIVRAT, if you haven't scrap the frame yet. Are the front hangers for the rear leaf springs good and how much for the pair. Thank's Jason __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

09-16-2005, 11:05 AM	#2
Big Bad 1972 Blazer Registered User Join Date: Jan 2005 Location: Armada, MI 48188 Posts: 83	If nobody gets the frame from you and if it's in decent shape, would you be willing to cut the front of the frame on both rails back to the core support body mounts off? PM me if so, I'm looking for these hunks of the frame to repair my '72.

09-17-2005, 10:17 AM	#4
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Big Bad 1972 Blazer... the front frame pieces have been wrecked,straightened, drilled and welded upon and are really ugly.. dont really think you would want them..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.