FS 68-72 LW bed & other stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cadiac · 10-23-2005, 01:10 PM

Decided to use a later model bed, so I'm selling this one. Someones been working it, -it has small amounts of bondo at the stake holes ?? right side is straight -left side is dented behind where the bondo can be seen. It is not rotted but has heavy pitting in the floor at front. Floor has some dents -tubs have small dents/dings. (I'd intended to Por 15 -coat with Rhino liner type kit the floor) Rear panel has holes cut for bumper braces, -I have another bottom to cut patches out of. $200 --Have a gold LW tail gate thats real decent/no rot $150 --Another LW gate a little dented $40 --left LWB side -has pin holes in wheel arch and some damage/some rust where tub meets inside. $30 --67-68 hood with 4 small dings/dents $25 --67 left fender a little bondo and a pin hole in pocket $25 --pair driver trailing arms from 3/4 $40 --1 in cab tank $25 Email for other pics, Thanks -Steve

Jakes-66-K10 · 10-23-2005, 02:24 PM

Do you have pics of the tailgate? I may be interested if it has the woodgrain trim.

cadiac · 10-23-2005, 03:41 PM

The gold/nice gate is from a 68,- I should have described it better. It didn't have the woodgrain. The other gate did have it/Bad shape. Trim's all off of both. Will get pics shortly of both gates if you still want to look.

cadiac · 10-30-2005, 02:54 PM

No I don't, sorry.

cadiac · 11-22-2005, 12:26 AM

bump

Green Machine · 11-23-2005, 01:49 PM

Put me first in line for the good tailgate -Tom

cadiac · 11-23-2005, 01:58 PM

Ok it's yours then. Sending a PM -Steve

cadiac · 11-26-2005, 01:16 PM

Bump-_-_-_ I have pics of everything -can send. Send your email in a PM -Steve

cadiac · 12-02-2005, 03:32 AM

bump

Green Machine · 12-03-2005, 12:07 AM

PM and Email sent -

Tom

chevykevy · 10-30-2005, 12:25 PM

Do you a set of spark plug heat shields for the rams horn manifolds. I need the wire loomd for the rear of the engine and under the manifolds too. Thanks.

10-23-2005, 01:10 PM	#1
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	FS 68-72 LW bed & other stuff Decided to use a later model bed, so I'm selling this one. Someones been working it, -it has small amounts of bondo at the stake holes ?? right side is straight -left side is dented behind where the bondo can be seen. It is not rotted but has heavy pitting in the floor at front. Floor has some dents -tubs have small dents/dings. (I'd intended to Por 15 -coat with Rhino liner type kit the floor) Rear panel has holes cut for bumper braces, -I have another bottom to cut patches out of. $200 --Have a gold LW tail gate thats real decent/no rot $150 --Another LW gate a little dented $40 --left LWB side -has pin holes in wheel arch and some damage/some rust where tub meets inside. $30 --67-68 hood with 4 small dings/dents $25 --67 left fender a little bondo and a pin hole in pocket $25 --pair driver trailing arms from 3/4 $40 --1 in cab tank $25 Email for other pics, Thanks -Steve Attached Images Last edited by cadiac; 11-26-2005 at 01:18 PM.

10-23-2005, 02:24 PM	#2
Jakes-66-K10 Registered User Join Date: Aug 2004 Location: Idaho Posts: 640	Re: FS 68-72 LW bed & other stuff Do you have pics of the tailgate? I may be interested if it has the woodgrain trim.

10-23-2005, 03:41 PM	#3
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Re: FS 68-72 LW bed & other stuff The gold/nice gate is from a 68,- I should have described it better. It didn't have the woodgrain. The other gate did have it/Bad shape. Trim's all off of both. Will get pics shortly of both gates if you still want to look.

10-30-2005, 02:54 PM	#4
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Re: FS 68-72 LW bed & other stuff No I don't, sorry.

11-22-2005, 12:26 AM	#5
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Re: FS 68-72 LW bed & other stuff bump

11-23-2005, 01:49 PM	#6
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: FS 68-72 LW bed & other stuff Put me first in line for the good tailgate -Tom __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

11-23-2005, 01:58 PM	#7
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Re: FS 68-72 LW bed & other stuff Ok it's yours then. Sending a PM -Steve

11-26-2005, 01:16 PM	#8
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Re: FS 68-72 LW bed & other stuff Bump-_-_-_ I have pics of everything -can send. Send your email in a PM -Steve

12-02-2005, 03:32 AM	#9
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Re: FS 68-72 LW bed & other stuff bump

12-03-2005, 12:07 AM	#10
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: FS 68-72 LW bed & other stuff PM and Email sent - Tom __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

10-30-2005, 12:25 PM	#11
chevykevy Registered User Join Date: Jan 2004 Location: Wyoming Posts: 641	Re: FS 68-72 LW bed & other stuff Do you a set of spark plug heat shields for the rams horn manifolds. I need the wire loomd for the rear of the engine and under the manifolds too. Thanks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.