|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
04-16-2002, 12:54 PM
|
#1 |
|
cracker
Join Date: Sep 2001
Location: Wilmington, NC
Posts: 1,021
|
quick question about tranny fluid
ok, my gmc has a 4 speed with granny low, guys at auto zone say it takes 80 wt gear oil, but they say 1 1/2 quarts, is this correct? another one, i cant find the plug on my rear diff, how do you check/add fluid? one more, any one know the cappacity for the transfer case? i usualy just put fluid in till it ocmes out the hole (do the same with the tranny, but i guess im wrong)
__________________
FOUNDING MEMBER OF THE DRUM BRAKE CLUB Harry John Albert III located in Phoenix, AZ 1972 GMC JIMMY, 1969 lwb Chevy Frame, 1999 bmw k1200 ltc 1992 Kawasaki concours 1991 bmw k75 1973 cortez motorhome |
|
|
|
04-16-2002, 01:39 PM
|
#2 |
|
Registered User
Join Date: Dec 1999
Location: Old Mission, MI, USA
Posts: 2,507
|
Rear end, tranny and t-case all use gear oil, and all fill until it runs out the fill hole. Not sure of capacities. With the 465, it is handier to pull the fill plug, then pull the shifter handle and pour the oil in through the shifter hole until it runs out the fill hole.
------------------ Tim
__________________
Tim |
|
|
|
|
04-16-2002, 02:09 PM
|
#3 |
|
Weapons Of Construction
Join Date: Apr 2000
Location: Colorado, USA
Posts: 1,095
|
Your plug on the diff should be either on the pan on back or passenger side close to the pinion. If you want to drain it, you have to pull the pan and reinstall with a new gasket. You fill it till it runs out, just like the others.
__________________
1971 GMC 2500, 402/TH400 4.10 Daily Driver Lafayette, CO |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
