2wd 3/4 ton Polyurethane Body Mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell · 12-11-2005, 04:52 PM

Hey guys!

I've got a set of 2wd Energy Suspension Polyurethane body mounts on my K25. Unfortunately, they are too short, and the transfercase hits the bottom of the cab as a result.

I paid 50 bucks plus shipping for these from summit, put the cab / front clip down on em, but have not gone anywhere.

I'd like to sell them for 30 bucks plus shipping, or if someone has a set of RUBBER 3/4 ton 4x4 mounts, I'll trade you straight across. You pay shipping to me, I pay shipping to you

454_72_4X4 · 12-11-2005, 06:57 PM

Have any idea if these would fit a 72? (Also 3/4 4x4)
If so could ya get a shipping cost to 63445?

Russell · 12-11-2005, 08:01 PM

These are for a 2wd truck, not a 4x4, and I have no idea if they'd work on your 72...

454_72_4X4 · 12-11-2005, 08:39 PM

Oops. Didn't see that. I'll do some checkin and lookin.

Russell · 12-11-2005, 09:23 PM

Lemme know!

PS -- I am willing to trade for a set of used rubber mounts too. Just so long as they arn't sagging (I want the body lines between the cab and box to line up)

79BIG10 · 12-11-2005, 11:00 PM

Is there a difference on 1/2 and 3/4 ton sets?

Russell · 12-12-2005, 12:12 AM

Brandon, I think so...

You'll need to check with summit, where I originally bought them from.

79BIG10 · 12-14-2005, 02:34 AM

I emailed Energy Suspension and they were lost when I told them about the "Big10" weight rating. They're looking into it. BTW: What color are these?

Russell · 12-14-2005, 02:38 AM

Black

drpdblazer · 12-14-2005, 03:09 AM

does this set also come with the radiator support mounts am interested for a 79 blazer, shipping to 72947

79BIG10 · 12-15-2005, 01:59 AM

I found out that the 3/4 ton ones won't fit my truck

Russell · 12-15-2005, 12:00 PM

Yeah, its looking like there are 1/2 ton mounts, then 3/4 ton, 1 ton, and 4x4 mounts.

So apparantly, they should fit my truck, and that I need to change my floor, or install a mild body lift. However, these are still for sale, as I would still prefer a set of rubber mounts.

Quote:

Originally Posted by drpdblazer

does this set also come with the radiator support mounts am interested for a 79 blazer, shipping to 72947

drpdblazer -- These include the front mounts, front cab mounts, and rear pickup mounts. I'm not sure how a 79 blazer mounts up, but I think it has more mount locations than a stock pickup. I will also include the hardware that was sent with the mounts (6 8 grade washers, and two 8 grade rear cab mount bolts.

I can find out exact shipping for you in the next day or two, or we can just say 45 bucks shipped and call it good enough (my guess would be about 15 bucks shipping +- 3 - 5 bucks or so) as I would have to jack up my cab and stuff to get them out, then use blocks of wood to hold my cab off my t-case etc, lol

muddyole 69 · 12-16-2005, 10:20 PM

I am interested if/when the other guys have passed let me know thank you Mike

12-11-2005, 04:52 PM	#1
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	2wd 3/4 ton Polyurethane Body Mounts Hey guys! I've got a set of 2wd Energy Suspension Polyurethane body mounts on my K25. Unfortunately, they are too short, and the transfercase hits the bottom of the cab as a result. I paid 50 bucks plus shipping for these from summit, put the cab / front clip down on em, but have not gone anywhere. I'd like to sell them for 30 bucks plus shipping, or if someone has a set of RUBBER 3/4 ton 4x4 mounts, I'll trade you straight across. You pay shipping to me, I pay shipping to you __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

12-11-2005, 06:57 PM	#2
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: 2wd 3/4 ton Polyurethane Body Mounts Have any idea if these would fit a 72? (Also 3/4 4x4) If so could ya get a shipping cost to 63445? __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

12-11-2005, 08:01 PM	#3
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: 2wd 3/4 ton Polyurethane Body Mounts These are for a 2wd truck, not a 4x4, and I have no idea if they'd work on your 72... __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

12-11-2005, 08:39 PM	#4
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: 2wd 3/4 ton Polyurethane Body Mounts Oops. Didn't see that. I'll do some checkin and lookin. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

12-11-2005, 09:23 PM	#5
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: 2wd 3/4 ton Polyurethane Body Mounts Lemme know! PS -- I am willing to trade for a set of used rubber mounts too. Just so long as they arn't sagging (I want the body lines between the cab and box to line up) __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

12-11-2005, 11:00 PM	#6
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Re: 2wd 3/4 ton Polyurethane Body Mounts Is there a difference on 1/2 and 3/4 ton sets? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

12-12-2005, 12:12 AM	#7
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: 2wd 3/4 ton Polyurethane Body Mounts Brandon, I think so... You'll need to check with summit, where I originally bought them from. __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

12-14-2005, 02:34 AM	#8
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Re: 2wd 3/4 ton Polyurethane Body Mounts I emailed Energy Suspension and they were lost when I told them about the "Big10" weight rating. They're looking into it. BTW: What color are these? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

12-14-2005, 02:38 AM	#9
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: 2wd 3/4 ton Polyurethane Body Mounts Black __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

12-14-2005, 03:09 AM	#10
drpdblazer Registered User Join Date: Sep 2005 Location: arkansas Posts: 7	Re: 2wd 3/4 ton Polyurethane Body Mounts does this set also come with the radiator support mounts am interested for a 79 blazer, shipping to 72947

12-15-2005, 01:59 AM	#11
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Re: 2wd 3/4 ton Polyurethane Body Mounts I found out that the 3/4 ton ones won't fit my truck __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

12-16-2005, 10:20 PM	#13
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: 2wd 3/4 ton Polyurethane Body Mounts I am interested if/when the other guys have passed let me know thank you Mike __________________ hav'n fun be'n me



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.