Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
12-19-2005, 12:28 PM | #1 |
Registered User
Join Date: Sep 2005
Location: Miami County, kansas
Posts: 40
|
How do I adjust the wiper arm?
1983 K20.
The passenger side wiper arm rests well under the bottom edge of the windshield when it is down all they way. Is there a way to adjust the travel so that it rests on the bottom of the windshield where it should be? The driver's side wiper is fine. Thanks, Bud
__________________
Current GM toys: 1983 Chevrolet K20 4x4, 2004.5 Chevrolet 2500HD LT Duramax 4x4 |
12-19-2005, 12:31 PM | #2 |
Parts and more parts
Join Date: Nov 2003
Location: Lebo, Kansas (middle of nowhere
Posts: 6,821
|
Re: How do I adjust the wiper arm?
You take the wiper arm off of the post (That is grooved or splined) and move it one groove up and re-install it. Simple, especially if you have a wiper arm tool. I made one out of a piece of metal and it works well. The principal of the tool is to allow you the ease of rocking the arm splined part to sguare it up with the wiper post. It will then slide off and back on with ease. Snap-on sells them also.
|
12-19-2005, 12:33 PM | #3 |
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
|
Re: How do I adjust the wiper arm?
You have to take off the wiper and reposition it on the stalk...thats it.
^^^Pierce beat me to it.
__________________
Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 12-19-2005 at 12:33 PM. |
12-19-2005, 01:15 PM | #4 |
Right turn Clyde
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
|
Re: How do I adjust the wiper arm?
Wiper arm tool, Does that help with the overly tight spring that is a mpita? I need something that will keep the arm strait so I can better position the arm. I got it close enough but not where I want it. Got tired of messing with the wiper arm after about an hour it was like splitting hairs.
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI |
12-19-2005, 02:03 PM | #5 |
Registered User
Join Date: Sep 2005
Location: Miami County, kansas
Posts: 40
|
Re: How do I adjust the wiper arm?
Thanks for the replies.
I guess that I have to go hunt up this "wiper arm tool." Man, I hate buying a tool for a one-time job. Maybe I can find a shop that will let me borrow theirs...
__________________
Current GM toys: 1983 Chevrolet K20 4x4, 2004.5 Chevrolet 2500HD LT Duramax 4x4 |
12-19-2005, 02:14 PM | #6 |
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
|
Re: How do I adjust the wiper arm?
A very small screwdriver will work as well.
__________________
Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale |
12-19-2005, 08:22 PM | #7 |
Genuine Chevrolet
Join Date: Feb 2003
Location: South West Pennsylvania.
Posts: 582
|
Re: How do I adjust the wiper arm?
I bought a Lisle wiper arm removal tool from JC Whitney for $5.00. Worked great.
__________________
George 82 Silverado LWB 4x4 350 SM465 NP208 77 Chevrolet Blazer Chalet 400 TH350 NP203 |
12-20-2005, 07:14 PM | #8 |
Parts and more parts
Join Date: Nov 2003
Location: Lebo, Kansas (middle of nowhere
Posts: 6,821
|
Re: How do I adjust the wiper arm?
Like I said, I made one out of metal and it worked until I could buy a Snap-on tool. Mine looked like a 3/4" wide by 3/4" bent hook. I simply hooked on the bottom back of the wiper piece and applied pressure downward on top of the wiper arm to allow for the spring loaded piec to straigthen up on the splined wiper post. The metal has to be fairly heavy to stand up to the force needed.
|
Bookmarks |
|
|